DeLOCK PoweredUSB-kabel stekker 12 V naar DC 5,5 x 2,1 mm stekker haaks 1 m

The DeLOCK PoweredUSB cable male 12 V to DC 5.5 x 2.1 mm male angled 1 m is a purpose-built power lead that connects a PoweredUSB 12 V source to devices with a DC 5.5 x 2.1 mm female power jack. The cable is 1 metre long, finished in black, and integrates a standard male USB plug at one end and a right-angled male DC barrel connector at the other end to provide a secure, space-saving connection for installations where cable routing or clearance is limited.

Advantages

This cable supports delivering a stable 12 V supply from a PoweredUSB port to equipment with a 5.5 x 2.1 mm DC input, reducing the need for separate power adapters. The right-angled DC connector helps prevent strain on the device inlet and saves space behind mounted equipment. Its 1 m length balances reach and cable management for typical desktop and small-installation scenarios. The black jacket provides a neutral appearance suitable for consumer and commercial environments.

Suitable for

• Powering POS terminals, receipt printers and barcode scanners with a DC 5.5 x 2.1 mm female jack
• Connecting devices to PCs, hubs or PoweredUSB ports providing 12 V output
• Installations with limited rear clearance where a right-angled connector is preferred

Key specifications

• Connector A: male USB (PoweredUSB 12 V compatible)
• Connector B: male DC barrel 5.5 x 2.1 mm, right-angled
• Cable length: 1 m
• Colour: black
• Function: power transmission (12 V from PoweredUSB to DC barrel)

How to use

Insert the male USB plug into a PoweredUSB 12 V port on a compatible PC, hub or power supply. Connect the right-angled DC 5.5 x 2.1 mm plug to the device's female barrel power jack, ensuring correct orientation and a snug fit. Verify that the host PoweredUSB port supplies 12 V and that the target device accepts a 12 V input via a 5.5 x 2.1 mm barrel connector before powering on. Route the cable to avoid sharp bends and avoid placing heavy objects on the cable to maintain reliable contact.

Recommendations

Use this cable only with PoweredUSB ports or power sources that provide a regulated 12 V output and with devices rated for 12 V input via a 5.5 x 2.1 mm connector. Inspect connectors for damage before use and avoid excessive bending at the angled connector to prolong service life.