DeLOCK riser-kaart PCI Express x1 naar PCI 32-bit slot 60 cm kabel

The DeLOCK Riser Card PCI Express x1 to PCI 32 Bit Slot with a 60 cm cable converts a single PCIe x1 slot into a legacy 32-bit PCI slot, allowing installation of PCI cards in systems with available internal PCIe connectors. The flexible internal cable enables space-saving placement of the PCI slot inside the computer case and supports connection of standard PCI expansion cards. Windows 10, 8.1 and Server 2019 are supported.

Advantages

This riser card provides compatibility between a PCIe x1 host interface and a 32-bit PCI output slot using an internal 60 cm cable. Its flexible cable simplifies installation in compact or crowded cases and lets you position the PCI slot where needed. The adapter is designed for internal mounting and allows reuse of legacy PCI cards in modern motherboards that offer only PCIe connectors.

Suitable for

Key specifications

How to use

Install the riser card by connecting its PCIe x1 connector to an available internal PCIe slot on the motherboard. Secure the riser as needed inside the case and mount the PCI card into the 32-bit PCI slot on the adapter. Route the 60 cm cable to avoid contact with cooling fans or moving parts. After physical installation, boot the system and install any required drivers for the PCI device under the supported operating system.

Recommendations

For reliable operation, use the adapter only for internal installations, ensure the PCI card does not exceed the case clearance, and verify that the motherboard provides the required PCIe x1 slot. Avoid placing the cable near fans or heat sources and confirm driver compatibility with Windows 10, 8.1 or Server 2019.