DeLOCK Riser-kaart PCI Express x8 stekker naar x8 slot met kabel 30 cm

The DeLOCK Riser Card PCI Express x8 male to x8 slot with 30 cm cable provides a flexible connection solution to install a PCI Express x8 card in constrained spaces inside a computer case. The riser consists of a male x8 connector and an x8 slot linked by a 30 cm flexible cable, enabling repositioning of the PCI-E device while maintaining signal compatibility for devices designed for an x8 interface.

Advantages

The riser card supports a straightforward cable-mounted connection between a motherboard or adapter and a PCI Express x8 card, allowing space-saving installation and improved internal layout flexibility. With two 8-pin connectors and CE compliance, it is suitable for standard PCI-E x8 devices and meets applicable safety and conformity standards.

Suitable for

Key specifications

How to use

Power off the system and unplug the power cable before installation. Insert the PCI Express x8 male connector into the corresponding slot on the motherboard or adapter, and secure the board if applicable. Connect the PCI Express x8 card into the external x8 slot at the cable end, ensuring the card is seated firmly. Reconnect any required power connectors using the provided 8-pin connections, and verify secure routing of the 30 cm cable to avoid interference with fans or moving parts. Restore power and check device recognition in the operating system.

Recommendations

Use the riser in well-ventilated enclosures and avoid sharp bends in the 30 cm cable. Ensure all connectors are fully seated and verify compatibility with the specific PCI Express x8 device before installation.