DMX-wifi-set EUROLITE QuickDMX zender 1× + ontvanger 4× model 20000646

The EUROLITE QuickDMX Sender 1× + Receiver 4× set (model 20000646) provides a compact wireless DMX solution for transmitting DMX512 control signals between a lighting console and multiple fixtures without physical cabling. The set includes a single transmitter and four receivers that operate together to relay control data reliably across small to medium indoor venues. Designed for quick installation and flexible fixture placement, the QuickDMX set supports common lighting setups in event production, theatre, bars and temporary installations.

Advantages

The QuickDMX set eliminates the need for long DMX cable runs and enables faster rigging and de-rigging. Its configuration is straightforward, allowing integration with standard DMX512 consoles and fixtures. Compact housings and straightforward indicators simplify placement and troubleshooting. The wireless link reduces tripping hazards and clutter while enabling fixtures to be positioned where cable access would be difficult or impractical.

Suitable for

Key specifications

How to use

Connect the transmitter to the DMX output of your lighting console using a standard DMX cable and power the unit. Place receivers near the fixtures and connect each receiver to the fixture DMX input using standard DMX cables; then power the receivers. Match the transmitter and receivers according to the product manual so they operate on the same wireless channel. Verify the LEDs to confirm signal transmission and then test fixture control from the console to ensure correct channel mapping and operation.

Recommendations

Position the transmitter in a location with a clear line of sight to the receivers when possible and avoid placing the units directly behind large metal surfaces or near strong RF sources. For critical productions, test the full setup on site before the event and keep spare DMX cables and power supplies available. Adhere to local regulations regarding RF device operation and choose receiver placement to minimize cable length between receiver and fixture.