eSUN ePLA+HS 1,75 mm geel 1 kg - High-Speed-PLA-filament

When standard PLA can't keep up with your print speeds, ePLA+HS steps in. This high-speed PLA from eSUN is engineered to maintain excellent layer adhesion and low warping even at speeds up to 350 mm/s, making it a reliable choice for rapid prototyping and production. The vibrant yellow colour adds visibility to functional parts, while the ±0.03 mm diameter tolerance ensures consistent extrusion.

Highlights

• High-speed printing: optimized for 50–350 mm/s without sacrificing quality
• Good toughness and low warping for reliable prints on open-frame printers
• Excellent layer adhesion reduces delamination risk in tall or thin parts
• Precision diameter: 1.75 mm ±0.03 mm for smooth feeding
• Vacuum-sealed with desiccant to maintain dryness and printability

In daily use

ePLA+HS prints with a nozzle temperature of 210–230 °C and a bed temperature of 45–60 °C, making it compatible with most FDM printers. Its heat deflection temperature of 52 °C (0.45 MPa) suits non-load-bearing applications, while the 15% elongation at break provides some flexibility before failure. The 1 kg spool fits standard spool holders (200 mm diameter, 64 mm width) and feeds smoothly thanks to tight diameter control.

Full specifications

• Material: ePLA+HS (High Speed PLA)
• Diameter: 1.75 mm ±0.03 mm
• Net weight: 1 kg
• Colour: Yellow
• Printing temperature: 210–230 °C
• Bed temperature: 45–60 °C
• Recommended print speed: 50–350 mm/s
• Density: 1.24 g/cm³
• Tensile strength: 50 MPa
• Elongation at break: 15%
• Flexural strength: 70 MPa
• Izod impact strength: 5 kJ/m²
• Heat deflection temperature (0.45 MPa): 52 °C
• Melt flow index: 10.5 g/10 min (190 °C, 2.16 kg)
• Spool dimensions: 200 mm diameter, 64 mm width
• Packaging: Vacuum sealed with desiccant

Final note

For makers who demand speed without compromising on print quality, ePLA+HS in yellow is a dependable filament that keeps up with your fastest print settings.