EURA CGD-50A2 Koolmonoxide- en aardgasdetector 2in1

The EURA CGD-50A2 is a dual-purpose detector that safeguards your home from two silent threats: carbon monoxide (CO) and natural gas (methane). Combining advanced electrochemical and catalytic sensors, this wall-mounted device provides continuous monitoring with clear LCD display and loud 85 dB alarm. Ideal for residential use near gas appliances, boilers, or fireplaces.

Advantages

Dual detection in one unit saves space and cost. Electrochemical CO sensor ensures accurate readings, while catalytic sensor detects natural gas at 7% LEL. Large LCD shows CO concentration, gas status, and temperature. Easy wall-mount installation with manual self-test button.

Suitable for

• Homes with gas heating, stoves, or water heaters
• Garages or workshops using gas-powered tools
• RVs or cabins with propane appliances
• Any room where combustion appliances are present

Key specifications

• Detected gases: Carbon Monoxide (CO) and Natural Gas (Methane CH4)
• CO sensor: Electrochemical; Natural gas sensor: Catalytic
• CO alarm thresholds: 50 ppm (60-90 min), 100 ppm (10-40 min), 300 ppm (within 3 min)
• Natural gas alarm threshold: 7% LEL
• Alarm volume: 85 dB at 1 meter
• Power supply: AC 230V, 50Hz (no battery backup)
• Display: LCD showing CO concentration, gas status, temperature
• Operating temperature: 0°C to +50°C
• Operating humidity: 10% to 95% RH (non-condensing)
• Installation: Wall-mounted
• Certifications: EN 50291-1:2018 (CO), EN 50194-1:2009 (Natural Gas)
• Sensor lifespan: 5 years (CO sensor)
• Self-test function: Yes (manual button)
• Power consumption: <3W
• Warm-up time: Approx. 180 seconds
• Alarm indication: Audible alarm, LCD display, LED indicators (Power, Alarm, Fault)

Recommendations

Install at least 1.5 meters above floor level for optimal natural gas detection, and near sleeping areas for CO detection. Test weekly using the self-test button. Replace unit after 5 years or when sensor expires.