helos glasvezel OS2-patchkabel Uniboot LC/LC duplex 9/125 µm, LSZH, 2,0 mm, geel, 20 m (373371)

The Helos LWL Patch Cable Uniboot LC/LC Duplex 9/125µm OS2 20.0m Black is a single-mode fiber optic patch cable designed for long-distance, low-loss data transmission. The cable has LC duplex connectors on both ends in a uniboot configuration, a 9/125µm core/cladding diameter suitable for OS2 single-mode fiber, and a total length of 20.0 meters. The black outer jacket provides discrete routing in rack and conduit installations while the slim uniboot connector design reduces connector bulk in dense patch panels.

Advantages

The uniboot LC/LC duplex construction minimizes connector space and simplifies routing in densely populated racks and patch panels. Using 9/125µm single-mode OS2 fiber ensures low attenuation and stable performance over longer runs compared with multimode alternatives. A 20.0m length provides flexibility for linking equipment across rooms or between racks without additional splicing. The black jacket offers standard mechanical protection and helps visually integrate the cable into typical datacenter or office environments.

Suitable for

• Inter-rack and intra-room fiber connections in data centers and server rooms
• Telecommunications backbone links requiring single‑mode OS2 fiber
• High-density patch panels where reduced connector footprint is desired
• Optical equipment connections for switches, transceivers and patch panels

Key specifications

• Fiber type: Single-mode OS2
• Core/cladding diameter: 9/125 µm
• Connector type: LC to LC duplex uniboot
• Configuration: Duplex
• Length: 20.0 m
• Jacket color: Black

How to use

Route the patch cable avoiding sharp bends and mechanical stress; maintain a bend radius consistent with single‑mode fiber handling to prevent increased attenuation. Insert the LC connectors into the corresponding LC ports on equipment or patch panels until they click into place, ensuring correct polarity for duplex links. For removal, depress the connector latch and pull straight out to avoid damaging the ferrule or adjacent connectors. Label both ends if required to simplify later identification and troubleshooting.

Recommendations

Handle connectors by the boot and avoid touching the fiber endfaces; inspect and, if necessary, clean endfaces with approved fiber cleaning tools before mating. Use strain relief and cable management to secure the 20.0m run and maintain recommended bend radii. Store and transport the cable in a manner that prevents kinking or crushing.