InLine 16152 netsnoer zwart 2 m CEE7/16 IEC C7

Integrated switch for added convenience:The power cord has a practical on/off switch in the cable, allowing you to quickly disconnect it from the power supply.
Euro plug to C7 for versatile applications:Compatible with numerous AV devices, charging units, and other devices with a Euro 8 connection.
High safety thanks to 0.75 mm² cross-section:The wire cross-section ensures reliable power transmission within the specified power range.
Energy-efficient thanks to standby avoidance:The switch helps to avoid unnecessary power consumption, which is particularly advantageous in commercial applications.
Robust workmanship for indoor use:The black cable sheathing is inconspicuous and ensures stable and durable handling.

The InLine Euro power cable with switch is a well-designed solution for all applications in which devices with a Euro 8 connection need to be reliably supplied with power and completely disconnected from the mains when necessary. Thanks to the integrated on/off switch, the power flow can be conveniently controlled without pulling the plug out of the socket—this increases safety and reduces energy consumption in standby mode.
With a Euro plug (CEE 7/16, 2-pin) on the mains side and a C7 coupling connector (Euro 8, "Figure 8"), the cable can be used universally for many AV devices, power supplies, or chargers. The 0.75 mm² wire cross-section ensures a stable power supply with a maximum output of 625 W. The switch is positioned approximately 30 cm from the Euro plug (0.5 m from the center), offering additional flexibility in use.
The cable is designed for indoor use and is ideal for office workstations, service points, or sales areas where energy efficiency and ease of use are required.

Nominal voltage: 250 V AC
Nominal current: 2.5 A
Max. power: 625 W
Area of application: Indoor use
Color: Black

InLine 16152. Cable length: 2 m, Connector 1: CEE7/16, Connector 2: IEC C7, Cable type: H03VVH2-F. Input voltage: 250 V, Input current: 2.5 A

How to use

Insert the Euro plug into a suitable mains socket and connect the C7 connector to the device inlet. Use the inline on/off switch to cut or restore power as required; the switch eliminates the need to unplug the cable to fully disconnect the device from the mains. Ensure the connected device’s power rating does not exceed the cable’s maximum specifications and avoid using the cable outdoors or in damp environments.

Recommendations

Use this power cable indoors only and check that the device’s power consumption is within 625 W and 2.5 A limits. For permanent installations or devices with higher power requirements, select a cable with appropriate higher ratings. Keep the switch and connectors free of dust and moisture to ensure reliable operation.