InLine stroomkabel 16A CEE 7/7 recht / IEC320/C19 1,5m

Power cable with earth pin to IEC C19 for 16 A power supply

High performance up to 16 A:Supports the reliable operation of high-current devices such as servers and UPS systems
Safe power connection:Earth-connected plug with IEC C19 ensures a stable and standard-compliant power supply
Certified quality:VDE-certified for tested safety and reliable use in professional environments
Robust construction:Moulded plugs increase mechanical stability and reduce wear during operation
Flexible applications:Various lengths allow for installation tailored to requirements in different environments

This power cable with a safety plug and an IEC 60320 C19 equipment connector is designed for powering devices with high power consumption. It is suitable for use in demanding IT environments where a stable and safe power supply is required.
The CEE 7/7 safety plug establishes a reliable connection to the mains supply. On the device side, the IEC C19 plug enables the connection of high-power components. These include, amongst others, servers, UPS systems or other devices with corresponding power requirements.
The H05VV-F cable used is designed for indoor use and supports safe power transmission. The moulded connectors contribute to mechanical stability and increase service life with regular use.
Thanks to VDE certification, the cable meets relevant safety requirements and can be used in professional environments. The various lengths available offer additional flexibility during installation.

Plug: CEE 7/7 safety plug
Appliance plug: IEC 60320 C19
Cable type: H05VV-F
Rated voltage: 250 V
Maximum current: 16 A
Certification: VDE

InLine power cable 16A CEE 7/7 straight / IEC320/C19 1.5m. Cable length: 1.5 m, Connector 1: Power plug type F, Connector 2: IEC C19. Input voltage: 250 V, Input current: 16 A

How to use

Insert the type F (CEE 7/7) plug into a compatible 250 V mains socket and connect the C19 coupler to equipment with an IEC 60320 C19 inlet. Ensure connectors are fully seated and avoid forcing angled connections. Route the cable to prevent strain on connectors and keep it away from sharp edges and heat sources. Disconnect by pulling the plug, not the cable, and power down equipment if required by manufacturer guidelines.

Recommendations

Use this cable for devices rated for 16 A and 250 V. Inspect the cable and connectors regularly for damage, replace if insulation or contacts are compromised, and follow local electrical safety regulations when installing in racks or power distribution units.