Barthelme 51542628 RGBW LED-strip 24V 5m soldeeraansluiting 60 LEDs/m

The Barthelme 51542628 stands out as a professional-grade RGBW LED strip with a solder connection, designed for permanent installations where a secure, hard-wired link is preferred over plug-and-play connectors. Its 24V DC operation and 5-metre length make it suitable for extended runs with minimal voltage drop, while the RGBW colour mixing delivers both vibrant colours and a dedicated white channel for true white illumination.

Highlights

• RGBW colour type: combines red, green, blue, and a dedicated white LED for a wide colour palette and pure white light.
• 24V DC operating voltage: ideal for longer runs with consistent brightness and reduced power loss.
• Solder connection: ensures a robust and permanent electrical connection for professional installations.
• 60 LEDs per metre (SMD 5050): high LED density for uniform light distribution without visible hotspots.
• Self-adhesive backing with 3M tape: simplifies mounting on clean, flat surfaces.
• Cuttable every 100 mm (6 LEDs): allows precise length adjustment to fit specific spaces.

In daily use

This LED strip is intended for indirect lighting, accent lighting, or decorative applications in dry indoor environments. With a beam angle of 120°, it provides wide, even illumination. The strip is dimmable when used with a suitable PWM controller, allowing adjustment of brightness and colour effects. Its IP20 rating means it is not protected against moisture, so it should be installed away from damp or wet locations. The operating temperature range of -20 to +50 °C ensures reliable performance in typical indoor conditions.

Full specifications

• Product type: LED strip
• Colour type: RGBW (Red, Green, Blue, White)
• Operating voltage: 24 V/DC
• Length: 5000 mm (5 m)
• Connection type: Solder connection
• LEDs per metre: 60
• Total LEDs: 300
• LED type: SMD 5050
• Power consumption per metre: 19.2 W
• Total power consumption: 96 W
• Luminous flux (white): 250 lm/m
• Luminous flux (red): 100 lm/m
• Luminous flux (green): 200 lm/m
• Luminous flux (blue): 50 lm/m
• Beam angle: 120°
• IP rating: IP20
• Dimmable: Yes (with suitable controller)
• Cuttable interval: 100 mm (6 LEDs)
• Self-adhesive backing: Yes (3M tape)
• Colour rendering index (CRI): >80 (for white)
• Operating temperature range: -20 to +50 °C
• Lifetime: 50,000 h

Final note

For professional lighting projects requiring a reliable, custom-length RGBW strip with a permanent solder connection, the Barthelme 51542628 offers consistent colour and brightness across its full 5-metre length.