Barthelme 51542727 LED-strip met soldeeraansluiting 24V DC 5m warmwit 2700K 5000lm IP20

LED strip light from Barthelme's LEDlight flex series, delivering 5000 lumens of warm white illumination across a 5-meter length. The strip operates on 24V DC and features a solder connection for secure electrical integration.

Advantages

High luminous flux of 1000 lm/m ensures bright, even lighting. The strip is cuttable every 50 mm, allowing precise length adjustment. Self-adhesive 3M tape on the back simplifies mounting on clean, flat surfaces. With a CRI >80, colours appear natural and vibrant. The strip is dimmable with a suitable controller, offering flexible brightness control.

Suitable for

• Accent lighting in residential and commercial spaces
• Cove lighting and indirect illumination
• Under-cabinet lighting in kitchens
• Display and shelf lighting
• Architectural lighting details

Key specifications

• Operating voltage: 24 V/DC
• Light colour: Warm white (2700 K)
• Luminous flux: 5000 lm total (1000 lm/m)
• Power consumption: 48 W total (9.6 W/m)
• LED type: SMD 2835, 120 LEDs per meter
• Beam angle: 120°
• Colour rendering index (CRI): >80
• Dimmable: Yes (with suitable controller)
• Cuttable: Every 50 mm
• Connection type: Solder connection
• IP rating: IP20 (indoor use only)
• Self-adhesive: Yes (3M adhesive tape)
• Lifetime: 50,000 hours

Recommendations

For best adhesion, ensure the mounting surface is clean, dry, and free of dust or grease. Use a compatible 24V DC LED driver and, if dimming is required, a suitable PWM or constant voltage dimmer. Avoid bending the strip sharply at the cut points to prevent damage to the solder pads.