Lindy 2m RJ45 S/FTP LSZH netwerkkabel, grijs

Cat.7 S/FTP LSZH network cable with Cat.6A connectors supports bandwidth up to 600 MHz and is suitable for Ethernet standards up to 10 GBase-T. The cable features total braided shielding with individual foil shielding for each pair (S/FTP) and is designed for use in data centres, server rooms and rack-mounted network or control cabinets. Cables are manufactured and tested to ISO/IEC 11801 and are supplied individually in polybags. The connector imprint on the cable reads: 'Cat.6A S/FTP patch cords with 600MHz raw cable'.

Advantages

The LSZH jacket reduces smoke and hazardous gas emission in case of fire while braided and foil shielding provide high resistance to electromagnetic interference. Gold-plated contacts ensure corrosion-free, reliable connections over time. The snagless strain relief protects the connector latch during installation and removal, and the Cat.6A RJ45-style connectors meet practical requirements for 10 GBase-T networks despite the Cat.7 cable core.

Key specifications

• Cable category: Cat.7 (S/FTP)
• Connector type: Cat.6A / RJ45-style with gold-plated contacts
• Bandwidth / operating frequency: up to 600 MHz
• Shielding: braided overall shield + foil per pair (S/FTP)
• Jacket material: LSZH (Low Smoke Zero Halogen)
• Standard compliance: ISO/IEC 11801
• Supported Ethernet: up to 10 GBase-T
• Packaging: individually polybagged

How to use

Route the cable through racks or cable management systems from switch to device, avoiding sharp bends and excessive pulling forces. Insert the Cat.6A connectors into RJ45 ports until the latch clicks; the snagless strain relief protects the latch during insertion and removal. Ensure both ends are properly terminated and tested for continuity and performance to verify operation at up to 10 GBase-T and frequencies up to 600 MHz.

Recommendations

For best performance, install in environments with proper grounding and avoid running the cable parallel to high-voltage power lines. Test link performance after installation and choose cable lengths appropriate for your network layout to maintain 10 GBase-T speeds.