Microconnect B-FTP603PI Netwerkkabel roze 3 m Cat6 F/UTP (FTP)

The Microconnect B-FTP603PI is a 3 m Cat6 networking cable with F/UTP (B-FTP) shielding and RJ-45 connectors on both ends. It supports Cat6 performance up to 250 MHz and data rates up to 10000 Mbit/s, and is backward compatible with Cat5e and Cat5. The cable is produced in pink and includes latch protection on the connectors to reduce the risk of damage during tight installations.

Advantages

Shielding (F/UTP) reduces electromagnetic interference (EMI) and crosstalk, improving signal integrity and reducing transmission errors. Cat6 specification testing up to 250 MHz provides higher bandwidth capacity compared with earlier standards. Latch protection on the RJ-45 plugs helps prevent connector damage when routing the cable through confined spaces. Backward compatibility with Cat5e and Cat5 increases flexibility for mixed network environments.

Suitable for

• Home and small office wired networks
• Connecting switches, routers, modems and patch panels
• Audio/video and entertainment systems requiring stable wired connections
• Environments where EMI reduction is required

Key specifications

• Standard: Cat6 (tested up to 250 MHz)
• Shielding: F/UTP (B-FTP)
• Length: 3 m
• Connectors: RJ-45 — both ends
• Maximum data rate: up to 10000 Mbit/s
• Color: Pink
• Weight: 0.09 kg
• Backward compatibility: Cat5e, Cat5

How to use

Connect one RJ-45 plug to your network device (switch, router, modem or wall outlet/patch panel) and the other RJ-45 plug to the target device. Ensure the connectors are fully inserted and the latch clicks into place. Route the cable avoiding sharp bends and sources of strong electromagnetic interference where possible. If running the cable through tight spaces, press the latch gently to protect it from snagging or damage.

Recommendations

For optimal performance, use the cable at lengths within the 100 m Ethernet specification for Cat6 installations and avoid running parallel to power cables for long distances. Choose shielded terminations and properly grounded equipment in environments with significant EMI to fully benefit from the F/UTP shielding.