Microconnect B-UTP6005Y Netwerkkabel geel 0,5 m Cat6 U/UTP (UTP)

The Microconnect B-UTP6005Y is a 0.5 m Cat6 networking cable with RJ-45 connectors and U/UTP construction. It supports Cat6 performance up to 250 MHz and is suitable for high-speed Ethernet links up to 10,000 Mbit/s when used within compatible infrastructure. The yellow jacket improves visibility and identification in patch panels and cable runs.

Advantages

This Cat6 cable is backwards compatible with Cat5e and Cat5 networks and is tested to the Cat6 frequency of 250 MHz. The RJ-45 connectors include latch protection to reduce the risk of connector damage during installation in tight spaces. The compact 0.5 m length is convenient for short patch connections between devices, and the bright yellow colour helps with cable management and identification.

Suitable for

• Patching between a switch and a patch panel
• Connecting a modem or router to a nearby device
• Small office or home network and entertainment setups
• Short Ethernet runs where colour-coded cables are required

Key specifications

• Product: Microconnect B-UTP6005Y
• Length: 0.5 m
• Connectors: RJ-45 to RJ-45
• Standard: Cat6 (tested to 250 MHz), backwards compatible with Cat5e/Cat5
• Cabling: U/UTP
• Max data rate (per product data): up to 10,000 Mbit/s (within compatible infrastructure)
• Colour: Yellow
• Weight: 0.01 kg

How to use

Insert the RJ-45 connector into the corresponding port on each device or patch panel until the latch clicks into place. Route the 0.5 m cable without bending sharply and avoid placing it under heavy mechanical stress. For best performance, use within a structured cabling system compliant with Cat6 installation guidelines and keep the cable separated from strong electromagnetic interference sources.

Recommendations

Use this short Microconnect Cat6 patch cable for close-range connections where clear colour identification is useful; replace if the latch or connector shows visible wear. For longer runs or outdoor use, select an appropriately rated cable.