Microconnect B-UTP625 Netwerkkabel Grijs 25 m Cat6 U/UTP (UTP)

Microconnect B-UTP625 RJ-45 Cat6 25 m Grey is a 25-metre U/UTP Cat6 networking cable with RJ-45 connectors on both ends. It supports data rates up to 10000 Mbit/s and meets Cat6 testing up to 250 MHz, providing a reliable physical connection between devices such as switches, modems, routers and network infrastructure including patch panels, keystone jacks and wall outlets. The cable is grey and intended for home and small office network and entertainment applications.

Advantages

This Cat6 cable is backwards compatible with Cat5e and Cat5 standards and is tested to the Cat6 frequency of 250 MHz. It uses U/UTP shielding and features latch protection on the RJ-45 connectors to reduce the risk of connector damage during installation in tight spaces. The 25 m length offers flexibility for device placement while maintaining consistent performance for Ethernet connections.

Suitable for

• Connecting switches, routers and modems to patch panels or wall outlets
• Home and small office networks
• Entertainment systems and media devices requiring wired Ethernet
• Upgrading Cat5e/Cat5 installations to Cat6 performance

Key specifications

• Length: 25 m
• Cable type: U/UTP Cat6
• Connectors: RJ-45 — both ends
• Test frequency: up to 250 MHz (Cat6)
• Maximum data rate: up to 10000 Mbit/s
• Colour: Grey
• Weight: 0.506 kg

How to use

Route the Microconnect Cat6 cable between network devices or to the infrastructure outlet, ensuring the latch-protected RJ-45 connectors are inserted fully into the corresponding ports. Avoid sharp bends and tension along the cable run and keep the cable away from sources of strong electromagnetic interference. Verify link and speed settings on network devices after connection to ensure optimal performance.

Recommendations

For best performance, use this Cat6 cable for wired Gigabit or 10 Gigabit Ethernet connections where the run length does not exceed recommended standards; when installing in confined spaces, take advantage of the latch protection to reduce connector damage risk. If routing near power cables or heavy electrical equipment, maintain separation to minimise interference.