Netkabel Helos 262654 zwart 1,8 m CEE 7/7 IEC C13

The Helos 262654 power cable is a 1.8 meter black mains lead with a CEE 7/7 (Schuko/Europlug combined) plug on one end and an IEC C13 appliance connector on the other. Constructed with H05VV-F flexible insulation, the cable is specified for 250 V and 10 A operation, providing a standard, reliable connection for computers, monitors, printers and other IT or household equipment that accepts an IEC C13 inlet.

Advantages

This Helos power cable combines a universal CEE 7/7 mains plug with a common IEC C13 connector, enabling compatibility with many European sockets and a wide range of appliances. The 1.8 m length offers moderate reach without excess slack, and the black sheath provides discreet appearance and resistance to visible wear. The H05VV-F construction ensures flexibility for routing behind furniture or equipment while meeting the stated voltage and current ratings for safe everyday use.

Suitable for

• Desktop computers and workstations with IEC C13 inlets
• Monitors, printers and peripherals requiring a C13 power lead
• Consumer electronics and small office equipment rated up to 250 V / 10 A
• Replacement or spare mains lead for appliances using IEC C13 connectors

When it may not be suitable

This cable is not intended for permanently concealed wiring, installation inside walls, or use where local regulations require fixed wiring or higher temperature- and oil-resistant cable types. It is specified for up to 10 A and 250 V; devices that draw higher current or require different connector types (for example IEC C19 or country-specific non-CEE plugs) will need a different cable.

Key specifications

• Connector A: CEE 7/7 (Schuko/Europlug combined)
• Connector B: IEC C13
• Cable length: 1.8 m
• Cable type: H05VV-F flexible mains cable
• Rated voltage: 250 V
• Rated current: 10 A
• Colour: Black

How to use

Inspect the cable for visible damage before use. Insert the IEC C13 connector into the appliance inlet until it seats fully, then plug the CEE 7/7 plug into a compatible mains socket. Route the cable to avoid sharp bends, pinching, or heat sources. Disconnect by pulling the plug, not the cable, and store the lead coiled without tight kinks when not in use. Follow the appliance manufacturer’s instructions regarding power connections and safety.

What to consider before purchase

• Confirm your appliance has an IEC C13 inlet.
• Verify that 250 V / 10 A meets the device’s power requirements.
• Ensure a CEE 7/7 plug is suitable for your local mains socket type.
• Decide if 1.8 m length and black colour meet routing and aesthetic needs.

Recommendations

Use this Helos 262654 cable for standard desktop and office equipment where a flexible, reliable IEC C13 connection is required. Avoid using the cable where regulations call for fixed wiring or for devices exceeding the specified current rating.