Netkabel-verlenging Omnitronic koudapparaat 3x1,0 mm², 3 m lengte

Omnitronic Kaltgeräte power extension cable with three conductors and a 3 x 1.0 mm² conductor cross-section, 3 m length, is intended to extend IEC mains connections for audio, stage and AV equipment that use Kaltgeräte (IEC) connectors. The cable provides a flexible connection and extended reach between power sources and devices while maintaining secure contact and electrical continuity for sound, lighting and media equipment in temporary and fixed installations.

Advantages

The cable combines a practical 3 m length with a compact 3 x 1.0 mm² conductor configuration to balance flexibility and current-carrying capacity. Designed for professional AV and live-sound setups, it offers reliable mating with standard IEC Kaltgeräte connectors, low-profile routing for crowded racks and stages, and robust insulation for repeated handling. The product is compatible with common IEC inlet and outlet configurations used on amplifiers, mixers, power conditioners and stage equipment.

Suitable for

Key specifications

How to use

Connect the male IEC plug into the power inlet of the device requiring mains, and insert the female IEC connector into the power source or distribution unit. Ensure connectors are fully seated and that the cable is routed to avoid sharp bends, pinch points and tripping hazards. Disconnect power at the source before connecting or disconnecting the cable if the equipment does not support hot-plugging. Inspect connectors and cable jacket periodically for wear or damage and replace if any damage is detected.

Recommendations

Use the cable within the rated current limits of the connected equipment and avoid exceeding local mains ratings. For permanent installations, secure the cable with appropriate strain relief and avoid long-term exposure to direct sunlight or chemicals. For live events and public areas, route and secure the cable to minimize trip hazards and mechanical stress on connectors.