Netwerkkabel Digitus CAT 6 U/UTP RJ-45 Cat6 2m groen

The DIGITUS Network Cable CAT 6 U/UTP RJ-45, 2 m, green, is a Category 6 patch cord engineered for reliable gigabit network connections and compliance with ISO/IEC 11801 and DIN EN 50173. The cable uses copper conductors and is PoE+ ready, with an LSZH (Low Smoke Zero Halogen) sheath to reduce smoke and halogen emissions in case of fire. The transparent red-colored connector body enables quick identification of Category 6 cables.

Advantages

This Cat 6 U/UTP patch cord is manufactured and tested to Category 6/Class E specifications up to 250 MHz, including performance characteristics such as NEXT (near end crosstalk). The molded boots provide kink protection, strain relief and a latch protection that helps prevent the locking tab from breaking. The 2 m length and standard RJ-45 terminations make it suitable for typical workstation and patch panel connections.

Suitable for

• Gigabit Ethernet networks (10/100/1000Base-T)
• Patch panel to switch or switch to workstation connections
• PoE/PoE+ powered devices such as IP phones and access points
• Indoor installations requiring low-smoke, halogen-free cabling

Key specifications

• Length: 2 m
• Category: Cat 6 / Class E (250 MHz)
• Connectors: RJ-45 to RJ-45
• Conductor material: Copper (Cu)
• Sheath: LSZH (Low Smoke Zero Halogen)
• Color: Green (connector transparent red for identification)
• Standards: ISO/IEC 11801, DIN EN 50173
• PoE: PoE+ ready

How to use

Connect the RJ-45 plug at each end to the appropriate network ports (for example, switch to patch panel or switch to workstation). Ensure connectors are fully inserted until the latch clicks. Route the cable without sharp bends and avoid excessive tension to preserve the molded boot’s kink protection and strain relief. For PoE applications, verify device compatibility with PoE+ standards.

Recommendations

For best performance, keep cable runs within recommended channel lengths for structured cabling, avoid running parallel to high-voltage power lines, and use proper cable management to prevent bend radii that exceed the manufacturer’s recommendations.