Netwerkkabel EFB Elektronik K8096.0,5 RJ-45 Cat5e 0,5 m rood

Networking Cable EFB Elektronik K8096.0,5 is a 0.5 m Cat5e patch cable in red with RJ45 connectors on both ends. The unshielded U/UTP design contains 4 twisted pairs (2 x AWG24/7) insulated in PVC with an overall diameter of 5.4 mm. The cable meets TIA/EIA-568B wiring and uses IEC 60603-7 compliant RJ45 plugs with copper-plated contacts; the jacket is flame-retardant to IEC 60332-1.

Advantages

This Cat5e cable supports 10/100/1000Base-T(X) networks and provides reliable gigabit data transmission for short connections. The moulded strain relief reduces stress at the connectors while the compact 0.5 m length minimises excess cabling. The red colour allows easy visual identification in patch panels and small network setups.

Suitable for

• Connecting PCs, switches and routers over short distances
• Patching ports in network cabinets and wall outlets
• Temporary or permanent links in office or home LANs

Key specifications

• Length: 0.5 m
• Category: Cat5e (TIA/EIA-568B)
• Connectors: 2 x RJ45 (IEC 60603-7)
• Cabling: U/UTP, 4 pairs, 2 x AWG24/7
• Outer diameter: 5.4 mm, PVC jacket
• Flame retardant: IEC 60332-1
• Colour: Red

How to use

Insert each RJ45 plug into the corresponding Ethernet port on your devices until the connector clicks. Ensure TIA/EIA-568B wiring is used at both ends for proper signal mapping. For best performance, avoid tight bends near the connector and keep the cable length suitable for the intended short link.

Recommendations

Use this 0.5 m Cat5e cable for short, direct connections inside racks, between adjacent devices, or for visible patching where colour coding helps with identification. Do not expose the cable to excessive heat or mechanical strain; replace if the jacket or connector is damaged.