Netwerkkabel Equip Cat.6A S/FTP patchkabel RJ-45 3,0 m rood

The equip® Cat.6A S/FTP Patch Cord is a 3.0 m red network cable designed for high-speed data transmission up to 10000 Mbit/s. With RJ-45 connectors plated in gold and S/FTP shielding, the cable provides improved signal integrity and reduced electromagnetic interference, suitable for 10GBase-T networks and demanding network environments.

Advantages

This Cat.6A S/FTP patch cable offers higher bandwidth and a better signal-to-noise margin compared with lower-category cables. The gold-plated RJ-45 connectors ensure reliable contact and corrosion resistance, while the S/FTP shielding minimizes near-end and far-end crosstalk as well as external interference. The 3.0 m length and vivid red colour facilitate cable management and visual identification in server rooms and installations.

Suitable for

• 10GBase-T Ethernet connections
• High-speed network switches and routers
• Server racks and data centre patch panels
• Workstations requiring 10 Gbit/s links

Key specifications

• Cable length: 3 m
• Connector type: RJ-45 to RJ-45
• Cabling technology: 10GBase-T (Cat.6A)
• Maximum data rate: 10000 Mbit/s
• Shielding: S/FTP (overall foil + individually shielded pairs)
• Product colour: Red
• Weight: 0.101 kg

How to use

Connect one RJ-45 connector of the equip Cat.6A S/FTP patch cable to the network port of your switch, router or network interface card and the other connector to the corresponding port on the destination device. Ensure connectors are fully inserted until they click and avoid sharp bends or kinks in the cable to maintain performance. For best results, route the cable away from strong electromagnetic sources and follow structured cabling practices when installing in racks and panels.

Recommendations

Use this Cat.6A S/FTP cable for 10GBase-T applications and critical network links where reduced interference and high bandwidth are required. Replace cables that show visible damage to the jacket or connectors to preserve signal quality.