Netwerkkabel LOGON TCF66F015G RJ-45 Cat6a 1,5 m groen

The LOGON TCF66F015G RJ-45 Cat6a networking cable is a 1.5 m F/UTP cable designed for high-speed wired Ethernet connections. Built to Cat6a specification, the cable supports improved bandwidth and reduced crosstalk compared with lower-category cables. Both ends are fitted with RJ-45 connectors for straightforward plug-and-play connection. The cable is finished in green for easy identification within structured cabling or home setups and is described as a crossover cable suitable for direct device-to-device links where needed.

Advantages

The cable's Cat6a construction provides higher performance for Gigabit and 10 Gigabit-capable networks while its F/UTP shielding minimizes electromagnetic interference from nearby cables and equipment. RJ-45 terminations ensure compatibility with common network devices and the 1.5 m length balances flexibility with tidy cable management. The green jacket aids visual organization and quick identification in multi-cable environments.

Suitable for

• Connecting computers, switches and routers within a small office or home network
• Direct device-to-device connections where crossover wiring is required
• Patch panel to switch or wall outlet connections over short distances
• Environments that benefit from shielded cabling to reduce interference

Key specifications

• Cable length: 1.5 m
• Category: Cat6a
• Shielding: F/UTP (foil-shielded pairs with overall unshielded braid not present)
• Cable type: Crossover cable
• Connectors: RJ-45 to RJ-45
• Colour: Green

How to use

Insert each RJ-45 connector into the corresponding Ethernet port on the devices you want to connect until the latch clicks. For direct connections between two compatible devices that require crossover wiring, use this crossover cable as supplied. Route the cable to avoid tight bends and compressive stress, and keep it separated from power cables where possible to maintain optimal signal integrity. No special configuration is required at the cable level; device settings should be checked if link negotiation does not occur automatically.

Recommendations

For reliable performance, avoid kinking the cable and maintain bend radii greater than the cable diameter. Use the 1.5 m length for short runs such as desktop-to-switch connections or patch panel links, and consider shielded terminations and proper grounding practices in environments with high electromagnetic interference.