Binnen-tv-antenne met instelbare versterking, 1,8 m coaxkabel, 75 Ohm, 3G/4G-filter, DVB-T/T2, RED-conform

Weak or pixelated TV reception turns every broadcast into a frustrating experience. This Philips indoor antenna solves that by pulling in free-to-air DVB-T and DVB-T2 channels with clarity, even in areas where signals struggle. The adjustable gain lets you fine-tune reception strength, while the built-in 3G/4G filter blocks interference from mobile networks that often disrupt digital TV. A 1.8 m coaxial cable gives you freedom to place the antenna near a window or high on a wall, not just behind the TV. It connects directly to your TV or set-top box via a standard IEC male connector, and can be powered over USB—no separate power adapter needed if your TV has a USB port. Whether you are cutting the cord or just want a reliable backup for cable outages, this antenna delivers stable, high-quality reception without a monthly bill.

Who is it for

Anyone who wants free over-the-air TV without a subscription. It is ideal for apartments, dorm rooms, caravans, or homes where outdoor antenna installation is not possible. If you already own a TV with a built-in DVB-T/T2 tuner, this antenna is all you need to start watching local channels in full HD. It also works with older TVs using a separate set-top box.

Main features

• Adjustable gain (20–30 dBi) to boost weak signals or reduce overload in strong signal areas
• Built-in 3G/4G/LTE filter eliminates interference from mobile phones and data networks
• Receives VHF (174–230 MHz) and UHF (470–694 MHz) bands for complete DVB-T/T2 coverage
• 75 Ohm impedance with IEC male connector for direct connection to TV or set-top box
• 1.8 m coaxial cable allows flexible placement for best reception
• USB powered (5V) via TV USB port or any USB adapter – no separate power supply required
• Desktop stand and wall-mountable design for versatile installation
• Low noise figure (< 3 dB) ensures clear, stable picture quality
• RED compliant for safe and interference-free operation in the EU

Specifications

• Antenna type: Indoor
• Signal compatibility: DVB-T, DVB-T2 (Freeview, Freeview HD)
• Frequency range: VHF 174–230 MHz, UHF 470–694 MHz
• Gain: Adjustable, 20–30 dBi
• Impedance: 75 Ohm
• Coaxial cable length: 1.8 m
• Connector type: IEC male
• Built-in filter: 3G/4G/LTE
• Power supply: USB 5V (via TV/STB or USB adapter)
• Noise figure: < 3 dB
• Polarization: Horizontal and vertical
• Compliance: RED (Radio Equipment Directive)
• Mounting options: Desktop stand, wall mountable
• Colour: Black
• Material: ABS plastic

Tips

For best results, place the antenna near a window or on an exterior wall, as high as possible and away from large metal objects. Experiment with the gain control: start at a low setting and increase until the picture is stable, then back off slightly to avoid over-amplification. If you experience intermittent dropouts, try rotating the antenna or switching between horizontal and vertical polarization. The 3G/4G filter is always active, so you do not need to adjust it. If your TV does not have a USB port, use any standard 5V USB phone charger to power the antenna.