PLA-filament Flashforge 1,75 mm geel 0,5 kg

PLA Filament Flashforge 1.75 mm Yellow 0.5 kg is a 3D printing material from Flashforge designed for FDM/FFF printers that accept 1.75 mm PLA. The filament comes in a 0.5 kg spool and provides easy-to-print properties with low warping, making it suitable for prototypes, models and hobby parts. Follow your printer manufacturer's recommended temperatures and settings to achieve the best adhesion and surface finish.

Advantages

This yellow PLA filament offers consistent diameter and reliable feed for 1.75 mm extruders, low tendency to warp during cooling, and good surface quality for visible parts. As a PLA material, it prints at relatively low temperatures and does not require a heated enclosure, simplifying use on most desktop FDM/FFF printers.

Suitable for

• Prototyping and concept models
• Architectural and scale models
• Hobby parts, figurines and decorative items
• Educational projects and classroom use

Key specifications

• Brand: Flashforge
• Material: PLA (polylactic acid)
• Diameter: 1.75 mm
• Net weight: 0.5 kg
• Color: Yellow
• MPN: 90006418001
• EAN: 6971940405146

How to use

Load the filament into an FDM/FFF printer configured for 1.75 mm filament. Use the printer manufacturer's recommended nozzle and bed temperatures for PLA—typically a nozzle temperature in the range advised by Flashforge or your printer (refer to device documentation). Ensure proper filament feeding and purge initial extrusion until flow is consistent. Adjust print speed and cooling to optimize surface finish and layer adhesion.

Recommendations

Store the spool in a dry environment away from direct sunlight and moisture. For best results, dry the filament if it shows signs of moisture (e.g., bubbling during printing) and use a compatible nozzle size and slicer profile tailored to PLA 1.75 mm.