PoE-splitter Exsys EX-60328, 12V 1A uitgang voor niet-PoE-apparaten

The Exsys EX-60328 PoE splitter converts Power over Ethernet into a 12V DC output at up to 1A, enabling non‑PoE devices to receive local power while remaining connected to a single Ethernet cable for data. Designed for inline installation between a PoE source and a powered device, it separates power and data so equipment such as cameras, access points, routers or embedded devices can operate where only PoE is available. The compact unit fits into constrained installations and provides a stable 12V supply suitable for many low‑power networked devices.

Advantages

The Exsys EX-60328 provides a simple way to power 12V devices from a PoE network without requiring separate power wiring. Its compact form factor and inline connection make installation straightforward and space‑efficient. By delivering regulated 12V at up to 1A, the splitter supports a range of small networked devices while preserving Ethernet data throughput. The product reduces cabling complexity and enables flexible device placement where AC outlets are not available.

Suitable for

• IP cameras that require 12V DC and draw up to 1A
• Wireless access points or routers with 12V input
• Small network switches or embedded network devices with low power consumption
• Remote or wall‑mounted devices where only PoE is provided

Key specifications

• Output voltage: 12V DC
• Maximum output current: 1A
• Input: Power over Ethernet (PoE) from standard PoE sources
• Output connector type: DC barrel (compact connector for 12V devices)
• Form factor: Inline PoE splitter for installation within Ethernet cabling runs
• Typical applications: powering non‑PoE network equipment requiring 12V/1A

How to use

Connect the Ethernet cable from a PoE injector or PoE switch to the splitter's network input, then connect the splitter's network output to the device requiring data. Use the DC output lead to supply the device with 12V DC, observing the correct polarity and connector fit. Verify the PoE source can provide sufficient power budget for the splitter plus the powered device. No additional configuration is required; the splitter passively separates power and data and provides the regulated 12V output when PoE is present.

Recommendations

Confirm device power requirements before installation to ensure the 12V/1A output is sufficient. Use compatible DC connector sizes and check polarity. Install the splitter in a dry, ventilated location and avoid exposing it to extreme temperatures or moisture. If your PoE source follows a specific PoE standard, verify compatibility and available power budget to prevent undervoltage or overloading.