Power Frame stopcontactdoos Bachmann BM0024207 met 2x CEE7/3-stopcontacten, 1x USB-C PD 45W, 1x aansluitmodule, 0,2 m kabel

The Bachmann BM0024207 power frame is a compact desktop power strip designed to bring mains power and high-power USB-C charging to workstations, meeting tables and home desks. It integrates two CEE7/3 mains sockets, a USB-C Power Delivery port capable of delivering up to 45W, and an additional connector module. Supplied with a 0.2 m cable, the unit is intended for close-reach installation where a short, neat connection to the main supply is required.

Advantages

This power frame combines traditional mains sockets with a high-power USB-C PD output in a single compact housing. The 45W USB-C port supports fast charging of compatible phones, tablets and smaller laptops while the two CEE7/3 sockets accommodate standard mains devices such as monitors, lamps or chargers. The short integrated cable reduces clutter and makes the unit suitable for fixed placement on desktops and meeting-room furniture. The built-in connector module adds flexibility for specific installation or accessory requirements.

Suitable for

• Office desks and shared workstations where mains outlets and USB-C charging are needed
• Meeting rooms and conference tables to provide power for laptops and mobile devices
• Home workstations and study desks requiring a compact power solution
• Environments where a short, neat cable run to the mains is preferred

When it may not be suitable

This product is not intended for locations that require long cable runs to the mains or for permanent fixed wiring installations where conduit or flush mounting is necessary. It is also not suitable where high-current single appliances (significantly above typical office device consumption) demand dedicated circuit capacity or specialized industrial connectors.

Key specifications

• Socket types: 2 x CEE7/3 mains sockets and 1 x USB-C Power Delivery port
• USB-C PD output power: up to 45 W
• Cable length: 0.2 m integrated supply cable
• Form factor: compact desktop/tabletop power frame
• Included connector: one connector module for installation flexibility

How to use

Place the power frame on a desk or table near a mains outlet and connect the integrated 0.2 m cable to the supply. Plug mains devices into the two CEE7/3 sockets and connect phones, tablets or PD-capable laptops to the USB-C port for up to 45 W charging. Ensure connected devices and total load remain within the socket ratings and follow local electrical safety rules. For any installation involving furniture cut-outs or additional mounting, consult the furniture or facility installer to verify compatibility.

What to consider before purchase

• Verify that two CEE7/3 sockets and a single USB-C PD 45W port meet the device connection needs
• Consider the short 0.2 m cable length and whether a close mains outlet is available
• Ensure total connected load of mains devices does not exceed the socket ratings
• Check connector module suitability for any specific installation accessories you plan to use

Recommendations

Use the USB-C PD output primarily for charging phones, tablets and compatible laptops up to 45 W. Distribute mains loads across the two CEE7/3 sockets and avoid connecting single high-current appliances that could overload the set. Keep the short cable clear of sharp edges and avoid placing the unit where liquids could reach the sockets or connector module.