SAS-kabel BlueOptics X66032A-BL 2m MiniSAS-HD SFF-8644

The BlueOptics X66032A-BL is a 2 m MiniSAS-HD (SFF-8644 to SFF-8644) SAS cable designed for high-speed internal connections in server and storage environments. This cable supports SAS protocols and is intended for short-distance interconnects inside racks or between adjacent racks. It combines a compact MiniSAS-HD connector design with twinax copper construction to provide a reliable and space-saving link for storage controllers, disk enclosures and other SAS-enabled hardware.

Advantages

The MiniSAS-HD cable offers a high-density connector that reduces rack space requirements while maintaining support for high data rates. Passive twinax construction keeps power consumption low and reduces latency by relying on host and device interfaces for signal conditioning. The cable is lightweight and easy to route, and its SFF-8644 connectors provide an industry-standard mechanical and electrical interface for broad compatibility with compliant hardware.

Suitable for

• Connecting SAS controllers to drive enclosures
• Internal rack-to-rack or adjacent-rack short-distance links
• High-density storage systems requiring compact interconnects
• Environments using 6Gb/s and 12Gb/s SAS protocols

Key specifications

• Cable length: 2 m
• Connector type (both ends): MiniSAS-HD (SFF-8644)
• Transmission: supports 6Gb/s and 12Gb/s SAS protocols
• Construction: passive twinax copper cable
• Colours: black and silver
• Weight: approximately 0.16 kg

How to use

Connect each MiniSAS-HD (SFF-8644) connector to the corresponding SFF-8644 port on your SAS controller, host adapter or storage enclosure. Ensure connectors are fully seated and secured to maintain a stable electrical connection. Route the cable to avoid sharp bends and excessive strain; keep the run within recommended short-distance limits for passive twinax cables. Confirm that both ends and the connected devices support the intended SAS speed (6Gb/s or 12Gb/s) and that any required host or device firmware and settings are configured for the desired link rate.

Recommendations

For reliable operation, use the BlueOptics X66032A-BL within short-distance server and rack environments and avoid exceeding recommended bend radius. Verify that connected hardware supports SFF-8644 MiniSAS-HD interfaces and the target SAS protocol. Inspect connectors for debris before mating and avoid repeated unnecessary cycles to preserve connector integrity.