SATA-kabel DeLOCK 0,5 m stekker/stekker geel

This Delock SATA cable conforms to the SATA III standard and supports data transfer rates up to 6 Gb/s. It is intended for internal connections of SATA 6 Gb/s devices such as hard drives, controller cards or flash memory. The connector orientation on the drive side is designed so the cable is routed downward.

Advantages

The cable is backwards compatible with earlier SATA versions, allowing connection to older devices at their maximum supported speeds. Metal clips on the SATA connector provide an additional snap-in mechanism for a secure connection.

Key specifications

• Standard: SATA III (6 Gb/s)
• Compatible devices: HDD, controller card, flash memory
• Connector orientation: downward on HDD
• Backwards compatibility: supports earlier SATA versions at their native speeds
• Retention: metal clip for snap-in

How to use

Connect one end of the cable to the SATA port of the motherboard or controller card and the other end to the SATA device, ensuring the drive-side connector is oriented downward as required. Press the connector until the metal clip engages to secure the connection. Only use the cable for internal SATA connections and avoid excessive bending or tension.

Recommendations

For optimal performance, use this cable with devices and controllers that support SATA 6 Gb/s. When connecting to older SATA versions, transfer speeds will be limited to the maximum supported by those devices.