SATA-kabel ShiverPeaks BS78240-0.3 0,3 m zwart rood

The ShiverPeaks BS78240-0.3 SATA cable is a 0.3 meter internal data cable with male-to-male SATA connectors designed for connecting SATA storage devices to motherboards, RAID controllers or adapter cards. Its black-and-red color scheme matches many gaming and custom builds while providing a compact, reliable link for data transfer between drives and host interfaces. The cable supports standard SATA data signalling and is intended for internal PC use where a short, secure connection is required.

Advantages

This 0.3 m SATA cable offers a short, tidy connection that reduces cable clutter inside the case and minimises excess length that can impede airflow. The male-to-male SATA connectors provide a straightforward plug-and-play installation with compatible SATA sockets. The two-colour jacket (black and red) provides a clear visual cue for identifying the cable route and complements themed builds. The cable construction is suitable for typical SATA data rates and repeated insertions without significant wear.

Suitable for

• Connecting 2.5" or 3.5" SATA hard drives and SSDs to a motherboard or controller
• Internal PC builds where a short 0.3 m data connection is required
• Upgrading or replacing existing SATA data cables in desktop systems
• Systems with limited internal space where a compact cable reduces clutter

Key specifications

• Cable length: 0.3 m
• Connector type: SATA male to SATA male (data cable)
• Product colour: Black and red jacket
• Application: Internal SATA data connection for HDDs and SSDs
• Form factor: Flat/round profile suitable for internal routing (visual colour coding)

How to use

Power off the computer and disconnect it from mains power before installing the cable. Align the SATA connector keyed notch with the drive and motherboard SATA sockets and insert each end firmly until it seats. Route the cable to avoid sharp bends and keep it away from cooling fans and moving parts. After connecting, power on the system and verify the drive is detected in BIOS/UEFI or the operating system. For removal, gently pull the connector straight out to avoid damaging the latch or socket.

Recommendations

Use this short 0.3 m SATA cable for internal connections where compact routing and reduced cable bulk are priorities. Avoid excessive bending near the connector and ensure secure seating to maintain reliable data transfer. Replace the cable if you observe physical damage, intermittent connections, or degraded device detection.