SATA-kabel stekker/stekker DeLOCK 0,3 m geel

The DeLOCK SATA Cable Male/Male 0.3 m in yellow is designed for internal connections between SATA devices such as HDDs, controller cards or SATA flash storage. It complies with the SATA III standard and supports data transfer rates up to 6 Gb/s while remaining backwards compatible with earlier SATA versions. The cable uses metal-clip connectors for a secure snap-in connection and is routed so the connector leads to the right side when connected to a drive.

Advantages

This SATA cable supports SATA 6 Gb/s transfer speeds and is backwards compatible with earlier SATA versions. The male-to-male connectors with metal clips provide an additional snap-in hold. Its 0.3 m length is suitable for short internal connections and the yellow colour helps with easy identification in PC builds.

Suitable for

• Connecting internal HDDs to motherboard or controller cards
• Connecting SATA SSDs or flash storage internally
• Short cable runs inside PC cases or compact systems

Key specifications

• Manufacturer: DELOCK
• Model / MPN: 82828
• Cable type: SATA Male to Male
• Length: 0.3 m
• Colour: Yellow
• Data rate: up to 6 Gb/s (SATA III), backwards compatible with earlier SATA standards

How to use

Align the SATA connector with the SATA port on the drive or motherboard and push it in until the metal clip snaps in place. When connecting to a hard drive, the cable is oriented so the connector points to the right side. To disconnect, press the metal clip to release the latch and gently pull the connector out. Ensure the system is powered down when connecting or disconnecting internal SATA cables.

Recommendations

For reliable operation, use this cable for internal connections only and avoid sharp bends or heavy compression. Keep cable length short between drive and controller to maintain optimal data integrity and ensure correct orientation of the connector when installing in tight spaces.