SATA-kabel stekker/stekker DeLOCK 82808 0,2 m geel

This SATA cable by Delock supports the SATA III standard with data transfer speeds up to 6 Gb/s. It is intended for internal connections between SATA devices such as HDDs, SSDs, controller cards or flash storage and is backwards compatible with earlier SATA versions while operating at the corresponding lower speeds. The cable has metal clips on the SATA connectors to provide additional snap-in retention and comes in a compact 0.2 m length with a yellow jacket.

Advantages

The DeLOCK 0.2 m SATA Male/Male cable provides a reliable, short-length internal connection with SATA III compatibility (6 Gb/s). The male-to-male connectors ensure a secure plug fit and the metal retention clips help prevent accidental disconnection. Its 0.2 m length is suitable for builds with limited space, and the yellow colour makes routing and identification easier inside the system.

Suitable for

• Connecting internal 3.5" or 2.5" HDDs and SSDs to motherboard or SATA controller
• Connecting SATA controller cards to drives
• Short cable runs inside compact PC cases or rack-mount systems

Key specifications

• Standard: SATA III (backwards compatible to SATA I/II)
• Maximum data transfer rate: 6 Gb/s
• Connector type: SATA Male to SATA Male
• Cable length: 0.2 m
• Colour: Yellow
• MPN: 82808
• EAN: 4043619828081

How to use

Insert one SATA male connector into the SATA port of the drive and the other into the SATA port on the motherboard or controller card until the metal clip clicks into place. Ensure connectors are aligned with the L-shaped key to avoid damage. For drives with power removed, connect the SATA power cable separately from the power supply before powering the system.

Recommendations

Use this short 0.2 m SATA cable for internal connections where minimal cable length is required to reduce clutter and improve airflow. Avoid excessive bending at the connector ends and keep the cable clear of moving parts and heat sources. When connecting devices of different SATA generations, overall transfer speed will be limited to the lowest supported SATA version.