Schroefanker Fischer SX Plus groen 25 mm 90 stuks

The Fischer SX Plus Green screw anchor is made from at least 50% renewable raw materials and is designed for secure fixing in solid base materials. With a length of 25 mm and delivered in a pack of 90 pieces, this screw anchor is suitable for concrete, sand-lime brick and masonry. Its 4-way expansion and special fixing blades allow reliable pre-fixation of the screw and prevent the plug from slipping deeper into the drill hole during installation.

Advantages

The 4-way expansion provides high load transfer in solid building materials while the fixing blades hold the screw in position so it does not need to be held separately for overhead applications. The flexible plug edge reduces the risk of the anchor sinking into the borehole, enabling a stable and reliable installation. The use of renewable raw materials reduces the product's reliance on petrochemical plastics.

Suitable for

• Fixing fixtures and fittings in concrete
• Anchoring into sand-lime brick
• Masonry fixings for shelves, rails and brackets
• Professional and DIY wall fixings where short 25 mm anchors are required

Key specifications

• Brand: FISCHER
• Model / MPN: 567806
• EAN: 4048962481327
• Type: Screw anchor (expansion plug)
• Length: 25 mm
• Quantity: 90 pieces per pack
• Material: ≥50% renewable raw materials
• Suitable base materials: concrete, sand-lime brick, masonry

How to use

Drill a hole of the specified diameter and depth for the 25 mm Fischer SX Plus Green anchor, clean the borehole of dust, insert the plug until flush with the surface, then drive the screw into the plug. The fixing blades will secure the screw in position during installation, allowing comfortable setting even in overhead situations. Ensure the screw length and diameter are suitable for the specific load and fixture.

Recommendations

Use the Fischer SX Plus Green anchors only in the recommended base materials (concrete, sand-lime brick, masonry). Choose the screw diameter and embedment depth appropriate for the applied loads and follow standard installation torque values. For heavy loads or hollow materials, select a suitable alternative fixing system.