Account Contact
Je winkelwagen
Verzending via DPD & FedEx
Hulp nodig? Vraag het de AI

SFP-transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s

SFP-transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP-transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP-transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP-transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP-transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP-transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP-transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP-transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP-transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP-transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP-transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP-transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP-transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP-transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP-transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
SFP-transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
65,46 €
The BlueOptics TOM-10G-SFPP-SR1-BO is an SFP+ fiber optic transceiver designed for 10 Gbit/s network links. Housed in a metal enclosure and weighing approximately 20 g, this module follows MSA-compliant SFP+ form-factor standards and is intended for use in systems that accept SFP+ optics. The transc... Lees meer
Voorraad 2872 Code 1485798 Merk BLUEOPTICS Model TOM-10G-SFPP-SR1-BO Garantie 2 jaar

Bezorging & retourneren

Verwachte bezorgdatum vrijdag, oktober 23
Je blijft op de hoogte via ons uitgebreide trackingsysteem
Betaalopties
BetaalkaartVisaMastercardPayPalApple PayGoogle PayBankoverschrijving

The BlueOptics TOM-10G-SFPP-SR1-BO is an SFP+ fiber optic transceiver designed for 10 Gbit/s network links. Housed in a metal enclosure and weighing approximately 20 g, this module follows MSA-compliant SFP+ form-factor standards and is intended for use in systems that accept SFP+ optics. The transceiver supports high-speed optical transmission over appropriate fiber types and is specified with a long mean time between failures (MTBF) to support continuous operation in network equipment.

Advantages

This SFP+ transceiver delivers 10 Gbit/s data transfer capacity in a compact, silver metal housing and is compatible with standard SFP+ interfaces. Its MSA-conformant design ensures mechanical and electrical interoperability with a wide range of network switches, routers and storage systems that accept SFP+ modules. The unit’s high MTBF provides a measure of long-term reliability for installations that require extended uptime.

Suitable for

Key specifications

How to use

Install the transceiver into an available SFP+ port on compatible network equipment until it latches. Connect the appropriate LC fiber patch cable (single-mode or multimode as required by the link and device support) to the module’s optical interface, observing correct transmit/receive orientation. Configure the host device for a 10 Gbit/s link and verify link status and diagnostics through the system management interface. Power down the host device only if required by the vendor; otherwise hot-plug insertion and removal are supported by SFP+ ports that allow hot-swap operation.

Recommendations

Ensure the transceiver is used in equipment that supports SFP+ modules and the intended optical wavelength and fiber type. Use quality LC duplex patch cords and follow manufacturer guidelines for connector cleaning and handling to maintain link performance. If digital diagnostic monitoring (DDM/DOM) is required, confirm that the host hardware provides DDM support to access real-time module parameters.
Belangrijkste kenmerken
  • 10 Gbit/s Ethernet uplinks and aggregation links
  • Fibre Channel over Ethernet and high-speed storage networking
  • Short- to mid-range optical connections in data centers and telecom closets (use appropriate fiber type)
  • Replacement or spare SFP+ module inventory in network hardware supporting SFP+ optics
  • Interface type: SFP+
  • Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
  • Housing material and colour: metal, silver
  • Weight: 0.02 kg (approx. 20 g)
  • Reliability indicator: MTBF approximately 1,000,000 hours
Specificaties
Bedrijfstemperatuur (T-T)
0 - 70
Ethernet LAN
Yes
Gemiddelde tijd tussen storingen (MTBF)
1000000 h
Gewicht
0.02 kg
Gewicht verpakking
30 g
Glasvezel-ethernetbekabelingstechnologie
10GBASE
Glasvezelconnector
LC
Interfacetype
SFP+
Materiaal behuizing
Metal
Maximale bedrijfstemperatuur
70 °C
Maximale overdrachtsafstand
10000 m
Maximale overdrachtssnelheid
10000 Mbit/s
Minimale bedrijfstemperatuur
0 °C
Productkleur
Silver
Rx-golflengte (max.)
1310 nm
SFP-transceiverstandaard
LR
Singlemode-vezel (SMF) ondersteund
Yes
Tx-golflengte (max.)
1310 nm
Type ethernetinterface
10 Gigabit Ethernet
Type SFP-transceiver
Fiber optic
Prijsverloop van de afgelopen 6 maanden
SFP-transceiver BlueOptics TOM-10G-SFPP-SR1-BO 10000 Mbit/s
Actueel
65,46 €
Laagste
64,72 €
Hoogste
69,95 €
Wijziging 24 uur
+0,58 €   +1%
Week
+0,71 €   +1%
Maand
-1,87 €   -3%

Populaire producten in deze categorie

Hoi, ik ben de AI-assistent van DistriNode. Ik help je graag met het vinden van producten, het vergelijken van opties, het maken van offerte-PDF's of het openen van supportaanvragen.