SFP+ transceivermodule BlueOptics 00FE331-IB 10000 Mbit/s 1310 nm

The BlueOptics 00FE331-IB is an SFP+ fiber optic transceiver module engineered for 10 Gbit/s class network links. Operating at a wavelength of 1310 nm, this compact module supports high-speed data transmission over single-mode fiber and is intended for integration into switches, routers and other networking equipment with SFP+ slots. The transceiver is lightweight and features a silver housing, supplied as an individually packaged unit for handling and installation protection.

Advantages

This SFP+ transceiver offers a standardized form factor compatible with SFP+ interfaces and supports a maximum data transfer rate of 10000 Mbit/s, enabling high-throughput connections. The 1310 nm wavelength provides a balance between reach and performance for single-mode fiber links. Its compact size and low weight simplify installation and minimize space use in dense equipment racks. Individual packaging helps protect the module from contamination and mechanical damage prior to installation.

Suitable for

• 10 Gbit/s uplinks between switches and routers over single-mode fiber
• Server-to-switch connections in data center environments
• Longer-reach point-to-point links where 1310 nm operation is required
• Network equipment upgrades requiring SFP+ transceiver modules

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s
• Operating wavelength: 1310 nm
• Suitable fiber type: single-mode fiber (SMF)
• Product colour: silver
• Weight: 0.02 kg

How to use

Verify compatibility with the host device's SFP+ slot and supported transceiver specifications before installation. Handle the module by its edges and avoid touching the optical connector. Remove protective caps from both the module and fiber connector, then insert the transceiver firmly into the SFP+ slot until it latches. Connect the single-mode fiber cable, ensuring proper connector type and cleanliness. After insertion, confirm link status through the host device management interface and monitor link indicators for proper operation.

Recommendations

Keep optical connector end-faces clean and capped when not in use. Use appropriate ESD precautions during handling. For reliable performance, follow the equipment manufacturer's firmware and compatibility guidelines and verify link parameters after installation.