SFP+-transceivermodule BlueOptics 903240-BO 10000 Mbit/s glasvezel

The BlueOptics 903240-BO SFP+ transceiver module is a fiber optic 10GBASE-LR pluggable unit designed for 10,000 Mbit/s links over single-mode fiber. Housed in a robust metal shell and weighing approximately 20 g, the module provides an industry-standard SFP+ interface with an LC duplex connector and supports long-reach optical links up to several kilometers when used with appropriate single-mode cabling. The module implements separate 1310 nm transmitter and receiver lasers and is designed to comply with MSA mechanical and electrical specifications for broad interoperability.

Advantages

The module offers high data throughput at 10 Gbit/s and a compact SFP+ form factor for direct insertion into compatible ports. Its metal housing improves mechanical durability and thermal dissipation. Compliance with MSA standards ensures compatibility with a wide range of switches, routers and storage systems that accept MSA-compliant SFP+ optics. In addition, the product has a long mean time between failures (MTBF) which supports extended operational availability in production networks.

Suitable for

• 10 Gbit/s Ethernet links over single-mode fiber
• Data center uplinks between switches and routers
• Storage area network (SAN) and Fibre Channel over Ethernet (FCoE) connections
• Long-reach optical links in campus and carrier networks

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Optical wavelength: 1310 nm transmit and receive
• Connector type: LC duplex
• Optical fiber type: Single-mode fiber
• Housing material: Metal
• Typical weight: 0.02 kg
• Mean time between failures (MTBF): 1,000,000 hours

How to use

Install the BlueOptics 903240-BO by inserting the SFP+ module directly into a compatible SFP+ port until it latches. Connect the LC duplex single-mode fiber patch cord to the module and ensure correct transmit/receive orientation. Verify link status through the host device interface and, if available, enable any digital diagnostics (DDM/DOM) features supported by your hardware to monitor optical power, temperature and supply voltage. Remove the protective dust caps from the fiber connector and the module before making connections.

Recommendations

To achieve optimal performance, pair the transceiver with single-mode LC duplex patch cords and verify compatibility with the target switch or router firmware. Use DDM/DOM monitoring when supported to track link health, and follow ESD precautions and manufacturer guidance when handling and installing the module.