SFP+ transceivermodule BlueOptics AFCT-739ASMZ-BO 10000 Mbit/s 1310 nm

The BlueOptics AFCT-739ASMZ-BO SFP+ transceiver module is a compact fiber optic device designed for 10 Gigabit Ethernet and other high-speed optical links. It supports a maximum data transfer rate of 10000 Mbit/s and operates at a wavelength of 1310 nm over single-mode fiber. The module is built to MSA-compatible SFP+ form-factor dimensions, is RoHS- and CE-compliant and has a light silver housing with a weight of approximately 0.02 kg. The transceiver uses an LC duplex connector and supports standard optical protocols for distances suitable to the 10GBASE-LR class.

Advantages

The BlueOptics AFCT-739ASMZ-BO offers MSA-compliant electrical and mechanical interoperability with SFP+ ports, enabling plug-and-play replacement or expansion of compatible switches, routers and storage devices. The module provides an optical 1310 nm transmit and receive path suitable for single-mode fiber links and integrates components selected for long service life and stable performance. Built to industry standards and tested for compatibility, the transceiver supports digital diagnostics where supported by host hardware and reduces exposure to electromagnetic interference inherent to copper links.

Suitable for

• 10 Gigabit Ethernet links over single-mode fiber (10GBASE-LR)
• Long-distance optical connections between switches, routers and servers
• Data center uplinks and spine-to-leaf links
• Storage area network (SAN) interconnects and Fibre Channel over Ethernet

Key specifications

• Form factor: SFP+ (MSA compliant)
• Maximum data rate: 10000 Mbit/s
• Wavelength: 1310 nm
• Connector: LC duplex
• Media: single-mode fiber
• Operating standards: compatible with 10GBASE-LR optical class
• Housing colour: silver
• Weight: 0.02 kg
• Regulatory compliance: RoHS, CE

How to use

Insert the SFP+ transceiver into a compatible SFP+ port on switch, router or server until it clicks into place, then secure the module according to the host device instructions. Connect an LC duplex single-mode patch cable to the module, ensuring correct transmit/receive alignment. Verify link status in the host device management interface and, if supported, enable or read digital diagnostics (DDM/DOM) to monitor supply voltage, laser current, optical output and received power and temperature. Follow the network equipment vendor’s guidelines for hot-plugging and firmware compatibility when replacing or adding transceivers.

Recommendations

Use single-mode LC duplex fiber patch cords with appropriate attenuation and connector polishing for 10GBASE-LR links, and verify host compatibility before deployment. Maintain clean connector endfaces and follow recommended ESD precautions during handling. For monitoring, ensure the host hardware supports DDM/DOM to access diagnostic data. When planning links, account for fiber routing, splice and connector losses to remain within the transceiver’s optical budget.