Account Contact
Je winkelwagen
Verzending via DPD & FedEx
Hulp nodig? Vraag het de AI

SFP-transceivermodule BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm

SFP-transceivermodule BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP-transceivermodule BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP-transceivermodule BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP-transceivermodule BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP-transceivermodule BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP-transceivermodule BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP-transceivermodule BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP-transceivermodule BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP-transceivermodule BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP-transceivermodule BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP-transceivermodule BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP-transceivermodule BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP-transceivermodule BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
SFP-transceivermodule BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
89,80 €
The BlueOptics SFP-GLSD-70-A-BO is a single‑mode fiber SFP transceiver module designed for 1000BASE-ZX and similar gigabit optical links. It supports a maximum data rate of 1250 Mbit/s and operates at a nominal wavelength of 1550 nm. The module comes in a metal housing, weighs approximately 3 g, and... Lees meer
Voorraad 90 Code 1484949 Merk BLUEOPTICS Model SFP-GLSD-70-A-BO Garantie 2 jaar

Bezorging & retourneren

Verwachte bezorgdatum woensdag, oktober 21
Je blijft op de hoogte via ons uitgebreide trackingsysteem
Betaalopties
BetaalkaartVisaMastercardPayPalApple PayGoogle PayBankoverschrijving

The BlueOptics SFP-GLSD-70-A-BO is a single‑mode fiber SFP transceiver module designed for 1000BASE-ZX and similar gigabit optical links. It supports a maximum data rate of 1250 Mbit/s and operates at a nominal wavelength of 1550 nm. The module comes in a metal housing, weighs approximately 3 g, and uses a standard SFP interface with an LC duplex optical connector. It requires a 3.3 V supply and is intended for use in networking equipment that accepts MSA‑compliant SFP transceivers.

Advantages

The module follows MSA SFP form‑factor standards, which helps ensure interoperability with a wide range of switches, routers and storage devices that support compatible 1000BASE‑ZX transceivers. Its metal housing provides mechanical stability and thermal dissipation while the lightweight design keeps module weight minimal. Operating at 1550 nm and rated for up to 1250 Mbit/s, it is suitable for long‑reach single‑mode fiber links when used with appropriate patch cords and fiber infrastructure.

Suitable for

Key specifications

How to use

Install the transceiver into an SFP slot of a compatible network device while the device is powered according to the vendor guidance or hot‑plug as supported. Connect LC duplex single‑mode patch cords to the transmitter and receiver ports, ensuring correct TX/RX orientation and proper fiber polishing/cleaning. Configure the host device network settings to enable the link and verify operational parameters such as link speed and diagnostics through the device management interface. Confirm that the receiving endpoint and any intermediate equipment support 1550 nm single‑mode optics and the expected link distance.

Recommendations

Use high‑quality single‑mode LC duplex patch cords and clean connector endfaces before mating. Verify compatibility with the host hardware and enable Digital Diagnostic Monitoring (DDM/DOM) on platforms that support it to monitor supply voltage, optical power and temperature for proactive maintenance.

Belangrijkste kenmerken
  • Long‑reach single‑mode fiber Ethernet links (1000BASE‑ZX)
  • Interconnection of switches, routers and optical aggregators
  • Fibre Channel over Ethernet and SDH/SONET applications up to 1.25 Gbit/s
  • Replacement of MSA‑compatible SFP transceivers in compatible hardware
  • Interface type: SFP (MSA form factor)
  • Maximum data transfer rate: 1250 Mbit/s
  • Wavelength: 1550 nm
  • Connector: LC duplex (optical)
  • Supply voltage: 3.3 V
  • Housing: metal
  • Weight: approx. 0.003 kg
  • Fiber type: single‑mode
Specificaties
Aantal per verpakking
1 pc(s)
Bedrijfstemperatuur (T-T)
0 - 70
Duplexsysteem
Full
Gewicht
0.003 kg
Gewicht verpakking
2 g
Glasvezel-ethernetbekabelingstechnologie
1000BASE
Glasvezelconnector
SFP
Golflengte
1550 nm
Ingangsspanning
3.3
Interfacetype
SFP
Materiaal behuizing
Metal
Maximale bedrijfstemperatuur
70 °C
Maximale overdrachtsafstand
80000 m
Maximale overdrachtssnelheid
1250 Mbit/s
Minimale bedrijfstemperatuur
0 °C
Opslagtemperatuur (T-T)
-40 - 85
Productkleur
Silver
Rx-golflengte (max.)
1550 nm
SFP-transceiverstandaard
ZX
Tx-golflengte (max.)
1550 nm
Type SFP-transceiver
Fiber optic
Prijsverloop van de afgelopen 6 maanden
SFP-transceivermodule BlueOptics SFP-GLSD-70-A-BO 1250 Mbit/s 1550 nm
Actueel
89,80 €
Laagste
87,90 €
Hoogste
91,32 €
Wijziging 24 uur
+1,25 €   +1%
Week
+1,11 €   +1%
Maand
+1,23 €   +1%

Populaire producten in deze categorie

Hoi, ik ben de AI-assistent van DistriNode. Ik help je graag met het vinden van producten, het vergelijken van opties, het maken van offerte-PDF's of het openen van supportaanvragen.