SFP-transceivermodule BlueOptics SFP-OC3-MM-BO 155 Mbit/s 1310 nm

The BlueOptics SFP-OC3-MM-BO is an SFP fiber optic transceiver module designed for data transfer rates up to 155 Mbit/s. It operates at a wavelength of 1310 nm, uses a duplex LC connector for multimode fiber links and is built in a metal housing with a 3.3 V supply and a lightweight 3 g form factor. The module follows MSA-compliant SFP specifications and is compatible with a wide range of SFP interfaces and hardware platforms that support OC-3/100BASE-FX style transceivers.

Advantages

This transceiver offers stable optical transmission for short-range multimode fiber links with simultaneous transmit and receive channels via LC duplex. The metal casing provides mechanical durability and EMI resistance, while the low 3.3 V input and compact 3 g design simplify installation and reduce power consumption. The module includes support for digital diagnostics (DDM/DOM) where supported by host hardware, enabling remote monitoring of supply voltage, laser bias current, output power, input power and temperature.

Suitable for

Key specifications

How to use

Insert the SFP transceiver into a compatible SFP port on your switch, router or other network device while the device is powered down or following the manufacturer’s hot-swap guidance. Connect multimode fiber patch cords to the LC duplex connectors, observing correct transmit/receive alignment. Ensure the host device supports OC-3/100BASE-FX compatible SFP modules and, if needed, enable or verify DDM/DOM monitoring in the device software to read diagnostic parameters. After physical installation, verify link status and data rate in the host device interface.

Recommendations

Use high-quality multimode LC duplex patch cords and, where possible, connect through appropriate patch panels to maintain optical performance. Confirm compatibility with the specific network hardware model and firmware version before deployment and validate DDM/DOM support if remote diagnostics are required.