SFP+ transceivermodule BlueOptics SFP+SR_T-BO 10000 Mbit/s 850 nm

The BlueOptics SFP+SR_T-BO 10000 Mbit/s 850 nm is a compact SFP+ fiber optic transceiver module designed for 10 Gbit/s short-range links over multimode fiber. It supports LC Duplex connections and operates at an 850 nm wavelength, providing reliable optical transmission up to 300 m depending on fiber type. The module follows MSA SFP+ form-factor standards, weighs approximately 20 g and is intended for use in common network hardware such as switches, routers and storage systems that accept SFP+ transceivers.

Advantages

The transceiver offers a high maximum data transfer rate of 10000 Mbit/s and a short-range 850 nm optical interface that is widely supported in data center and campus environments. Its SFP+ form factor ensures broad compatibility with SFP+-capable equipment while keeping a small footprint and low weight for easy installation. Built and tested to industry MSA standards, the module provides stable optical performance and includes support for digital diagnostics monitoring for real-time information on supply voltage, laser current, optical power and temperature where the host system supports DDM/DOM.

Suitable for

Key specifications

How to use

Install the SFP+ module into any compatible SFP+ slot on switches, routers or storage devices by aligning the module with the slot and pressing until it latches. Connect LC Duplex multimode fiber patch cables to the module's transceiver ports, ensuring correct polarity. Verify link status on the host device and, if required, enable or monitor DDM/DOM parameters from the host management interface. Follow your equipment manufacturer's guidelines for hot-plug handling and ESD precautions during installation and removal.

Recommendations

Use high-quality multimode fiber and LC Duplex patch cables matched to the module’s 850 nm specification to achieve the stated reach up to 300 m. Confirm that your hardware platform supports SFP+ modules and, if you require real-time diagnostics, ensure the host device supports DDM/DOM. Handle the module with ESD protection and store unused ports with dust caps to maintain optical performance.