SFP+-transceivermodule BlueOptics SFPP-10GE-LRM-BO 10000 Mbit/s 1310 nm

The BlueOptics SFPP-10GE-LRM-BO is an SFP+ fiber optic transceiver module designed for 10 Gbit/s links over multimode fiber at a wavelength of 1310 nm. Housed in a compact metal casing and weighing approximately 2 g, the module supports LC duplex connections and operates from a 3.3 V supply. It conforms to MSA form-factor expectations and is intended for use in network equipment that accepts SFP+ 10GBASE-LRM optics.

Advantages

The module provides 10GBASE-LRM performance with support for transmission distances up to the protocol's multimode limit; its compact metal housing ensures mechanical durability and EMI resilience. Built to industry MSA guidelines, the transceiver is compatible with a wide range of SFP+ ports and offers low power operation at 3.3 V. Digital diagnostics (DDM/DOM) support is available when the host device implements the interface, enabling real-time monitoring of key optical and electrical parameters.

Suitable for

Key specifications

How to use

Insert the SFP+ transceiver into a compatible SFP+ port on your switch, router or storage device while the host is powered down or following the vendor's hot-swap procedure. Connect LC duplex multimode fiber patch cords to the Tx and Rx ports, ensuring correct polarity. If your host supports DDM/DOM, access the diagnostics through the device management interface to monitor supply voltage, laser bias current, optical output/input power and module temperature. Follow the network equipment vendor's guidelines for transceiver handling, electrostatic discharge protection and firmware compatibility checks.

Recommendations

Use quality multimode LC duplex patch cords and, where possible, route fibers through proper patch panels to maintain optimal link performance. Confirm that your network hardware supports 10GBASE-LRM optics and DDM/DOM before deployment. For best results, test links after installation and keep spare transceivers for critical links to minimize downtime.