SFP-transceivermodule BlueOptics SPG-DR-LH-CDFC-BO 155 Mbit/s 1310 nm

The BlueOptics SPG-DR-LH-CDFC-BO 155 Mbit/s 1310 nm is a compact SFP fiber optic transceiver module designed for point-to-point and network link applications. It supports a maximum data transfer rate of 155 Mbit/s and transmits at a wavelength of 1310 nm. Packaged in a durable metal housing and weighing just 2 g, this silver-coloured module requires a 3.3 V input and conforms to RoHS environmental standards. The module provides a standard SFP interface for straightforward integration with compatible switches, routers and media converters.

Advantages

The module's compact SFP form factor and light weight make it suitable for constrained installation spaces and high-density networking equipment. Operation at 1310 nm allows for reliable short- to medium-range fiber links while maintaining low power consumption with a 3.3 V supply. The metal casing enhances mechanical robustness and electromagnetic shielding, and RoHS compliance ensures the product meets common environmental and safety requirements.

Suitable for

• Replacing or upgrading SFP ports in switches and routers
• Establishing single-mode fiber links within campus and enterprise networks
• Connecting to media converters and fiber multiplexers
• Laboratory or test equipment for validating fiber optic links at 155 Mbit/s

Key specifications

• Interface: SFP form factor
• Maximum data transfer rate: 155 Mbit/s
• Operating wavelength: 1310 nm
• Housing: metal casing
• Supply voltage: 3.3 V
• Weight: approximately 0.002 kg
• Colour: silver
• Environmental compliance: RoHS

How to use

Install the BlueOptics SFP transceiver into a compatible SFP slot on a switch, router or media converter, ensuring the module is fully seated. Connect the appropriate single-mode fiber cable to the transceiver's optical port, observing correct connector type and polarity. Power on the host device; the transceiver will operate at the supported data rate and wavelength. Monitor link status through the host device to verify successful negotiation and signal integrity.

Recommendations

Use the module with compatible single-mode fiber and verified connectors to achieve expected performance at 155 Mbit/s and 1310 nm. Avoid exposing the optical port to dust; use protective caps when the transceiver is not connected. Confirm host device compatibility with SFP modules and check firmware or hardware documentation for any specific interoperability notes.