SFP-transceivermodule BlueOptics SRX-SFP-10GE-ER-BO 10000 Mbit/s

The BlueOptics SRX-SFP-10GE-ER-BO is an SFP+ fiber optic transceiver module designed for single-mode networks with a maximum data transfer rate of 10000 Mbit/s. Housed in a silver metal casing and weighing 20 g, this module implements the 10GBASE-ER optical standard with LC duplex connectivity and supports long-reach links according to MSA specifications. Built to deliver long operating life and reliable optical transmission, it is suitable for high-speed Ethernet and fibre applications where interoperability and compatibility with major vendor platforms are required.

Advantages

The module provides 10 Gbit/s optical data transmission over single-mode fiber using 1550 nm wavelength components for both transmitter and receiver. Compliance with MSA mechanical and electrical standards ensures interoperability with a wide range of switches, routers and storage systems that accept SFP+ modules. A robust metal housing and component selection deliver a high MTBF of 1,000,000 hours, supporting stable operation and reduced maintenance intervals. Digital diagnostics (DDM/DOM) functionality enables remote monitoring of parameters such as voltage, temperature, laser bias current and optical power when supported by host hardware.

Suitable for

Key specifications

How to use

Install the BlueOptics SFP+ transceiver into a compatible SFP+ port until it latches securely. Connect an appropriate LC duplex single-mode fiber patch cable ensuring transmit-to-receive alignment. Verify link activity and speed on the host device; enable or check DDM/DOM telemetry in the host management interface if real-time diagnostics are required. Follow the host vendor’s guidance for module compatibility and any necessary firmware or configuration settings. Handle the transceiver by its body, observe ESD precautions and keep dust caps on connectors when not in use.

Recommendations

Use high-quality single-mode fiber and correctly rated LC duplex patch cords to achieve the specified range and signal quality. Confirm that your host hardware supports 10GBASE-ER SFP+ modules and DDM/DOM if you require diagnostics. Store and operate the module within the temperature and humidity ranges specified by your system vendor, and schedule periodic checks of optical power and link status to maintain high availability.