Sygonix SY-4755360 PIR-bewegingsmelder 180° relais wit IP65 plafond-/wandmontage

Unwanted guests and dark entryways are a constant concern for property owners. The Sygonix SY-4755360 PIR motion detector addresses this by automatically switching lights on when movement is detected, enhancing security and convenience. With a wide 180° detection angle and adjustable settings, it provides reliable coverage for outdoor and indoor spaces.

Who is it for

This motion detector is ideal for homeowners, business owners, and facility managers who need automatic lighting control in areas such as entrances, hallways, garages, and building perimeters. It suits anyone seeking a durable, weather-resistant sensor that can handle high-wattage lighting loads.

Main features

• Passive infrared (PIR) sensor detects motion within a 180° angle and up to 12 m range.
• Adjustable time delay from 10 seconds to 7 minutes to control how long lights stay on.
• Adjustable light sensitivity from 3 to 2000 lux, allowing operation only in darkness or also in daylight.
• Relay output supports up to 1200 W incandescent or 300 W LED/fluorescent loads.
• IP65-rated weatherproof housing for outdoor use; suitable for ceiling, wall, or surface mounting.
• Operates on 220–240 V AC, 50/60 Hz with low standby power consumption of 0.5 W.

Specifications

• Sensor type: Passive Infrared (PIR)
• Detection angle: 180°
• Detection range: max. 12 m (at 2.4 m installation height)
• Recommended installation height: 1.8 - 2.5 m
• Time setting: 10 seconds - 7 minutes (adjustable)
• Light sensitivity: 3 - 2000 Lux (adjustable)
• Operating voltage: 220 - 240 V/AC, 50/60 Hz
• Max. switching capacity (incandescent): 1200 W
• Max. switching capacity (LED/fluorescent): 300 W
• Output type: Relay
• Power consumption (standby): 0.5 W
• Operating temperature: -20 to +40 °C
• Humidity: <93% RH (non-condensing)
• Housing material: PC (Polycarbonate)
• Protection class: II
• IP rating: IP65
• Mounting type: Ceiling, Wall, Surface Mount
• Product colour: White

Tips

For optimal detection, install the sensor at a height of 2.2 to 2.5 m and avoid pointing it toward reflective surfaces or heat sources. Adjust the lux setting to prevent activation during daylight if not needed. Ensure the load does not exceed the rated switching capacity.