USB-kabel PureLink PI6630-030 USB4 Gen 2x2 3 m USB C zwart

The PureLink PI6630-030 MicroX4 USB-C male–female extension cable is a 3 m passive USB4 Gen2x2 link designed for combined data, video and power transmission in professional AV and integration environments. Using micro-coaxial cable technology with silver-plated copper conductors and full shielding, the cable aims to preserve signal integrity over longer runs while remaining flexible and mechanically robust. The male-to-female interface supports TLS (Tru-Lock-System) and ICS locking for secure, fixed installations.

Advantages

This passive USB-C extension supports USB4 Gen2x2 data rates up to 20 Gbps while remaining backward compatible with USB 3.x and USB 2.0 devices. Silver-plated copper conductors reduce resistance for improved high-frequency performance, and the micro-coaxial design with full shielding minimises electromagnetic interference. The cable carries USB Power Delivery up to 100 W (48 V / 5 A SPR) and DP Alt-Mode video up to 4K at 144 Hz, allowing unified transmission of data, video and power in a single cable without active electronics or repeaters.

Suitable for

• Rack-mounted AV equipment and control enclosures
• Conference rooms and BYOD setups
• Digital signage and fixed podium installations
• Docking stations and mini-PC power + display connections

Key specifications

• Model: PureLink PI6630-030 (MicroX4 family)
• Length: 3 m
• Connectors: USB-C straight male to USB-C straight female
• USB version: USB4 Gen2x2 (up to 20 Gbps), backward compatible with USB 3.x / 2.0
• Conductors: Silver-plated copper (SPC)
• Power: USB PD up to 100 W SPR (48 V / 5 A)
• Video: DP Alt-Mode up to 4K @ 144 Hz
• Shielding: Full shielding, micro-coaxial design for EMI reduction
• Colour: Black
• Quantity: 1 pc

How to use

Connect the USB-C male end of the PI6630-030 into the host or source device and attach the female end to the downstream device or a standard USB-C cable. If a fixed or semi-permanent installation is required, secure the connection using the TLS clip or compatible ICS locking mechanism on supported hardware. The passive design requires no external power or adapters; devices negotiate Power Delivery and alternate mode video automatically per USB-C standards.

Recommendations

For best results in AV installations, route the cable away from large electrical motors or unshielded power bundles, and use the TLS locking clip in rack or signage installations to prevent accidental disconnection. Verify device compatibility with USB4, DP Alt-Mode and 100 W USB PD when planning power-critical deployments.