USB-verlengkabel ShiverPeaks S/CONN 50 m USB 3.0 A naar USB 3.0 A + USB Micro B

ShiverPeaks S/CONN 50 m USB 3.0 A to USB 3.0 A + USB Micro B is a 50‑metre USB extension cable designed to extend USB 3.0 connections over long distances. The cable features a USB 3.0 Type A male connector at one end and a USB 3.0 Type A female connector at the other, with an additional USB Micro‑B connector to support devices that require the smaller interface. It is intended for installations where a long physical reach is necessary and where devices and hosts support USB 3.0 signalling.

Advantages

The cable provides a straightforward physical extension of USB 3.0 Type A connections up to 50 metres without requiring active repeaters in the same enclosure. Its additional USB Micro‑B connector adds compatibility for peripherals that use the Micro‑B interface. The single‑cable solution reduces cable clutter and enables tidy routing of USB connections in environments such as media setups, surveillance, and industrial workstations. The construction focuses on maintaining signal integrity and practical usability for long‑reach USB links.

Suitable for

• Extending USB 3.0 connections between host computers and distant peripherals
• Media production workstations where cameras, storage or capture devices are positioned away from the host
• Surveillance systems requiring long cable runs to cameras or recorders
• Industrial or laboratory setups with remote USB sensors, controllers or data loggers
• Temporary installations and events where a long USB reach is needed

Key specifications

• Cable length: 50 metres
• Standard: USB 3.0 signalling compatibility
• Connectors: USB 3.0 Type A male to USB 3.0 Type A female plus USB Micro‑B connector
• Intended use: data extension for USB 3.0 devices and hosts
• Typical applications: media, surveillance, industrial peripherals

How to use

Connect the USB 3.0 Type A male end to the host computer or USB hub and plug the USB 3.0 Type A female end into the device's USB Type A plug or use the included Micro‑B connector for compatible peripherals. Ensure both host and device support USB 3.0 to achieve high‑speed transfer rates. Confirm power requirements for connected devices; some peripherals may require an external power source or a powered USB hub when used at extended distances. Route the cable to avoid sharp bends and strong electromagnetic interference sources to maintain signal quality.

Recommendations

Before deploying, verify device compatibility with USB 3.0 and check whether connected devices need supplemental power. For installations sensitive to interference, keep the cable away from high‑voltage lines and radio transmitters. If you require guaranteed USB 3.0 SuperSpeed performance over long distances, consider testing the connection with your specific devices and using a powered hub or repeater if necessary.