ACT 1,8 m seriële 1:1-verbindingskabel 25-polige D-Sub stekker – 25-polige D-Sub bus

The ACT 1.8 metre Serial 1:1 connection cable features a 25 pin D-sub male connector on one end and a 25 pin D-sub female connector on the other. With a length of 1.8 metres and a beige jacket, this cable is designed for devices that require a RS-232/parallel-style serial connection. It provides a direct 1:1 wiring between the male and female 25‑pin D‑sub connectors to support reliable data transfer in computing and industrial environments.

Advantages

The cable offers a straightforward 1:1 pin mapping between connectors, a standard 25‑pin D‑sub interface compatible with many legacy and industrial devices, and a 1.8 m length that allows flexible routing between equipment. Its molded hoods provide strain relief at each connector, reducing wear at connection points.

Suitable for

• Connecting RS-232 or parallel-capable devices with 25‑pin D-sub ports
• Linking industrial controllers, PLCs or measurement equipment
• Legacy computer and peripheral connections requiring a 1:1 wiring

Key specifications

• Brand: ACT
• Model / MPN: AK4045
• EAN: 8716065116175
• Connector A: 25 pin D-sub male
• Connector B: 25 pin D-sub female
• Wiring: 1:1 (straight-through)
• Length: 1.8 metres
• Colour: Beige

How to use

Align the 25‑pin D‑sub male connector with the female port on the target device and gently insert until the connector seats. Secure the connection if screws are provided. Connect the female end to the counterpart device in the same manner. Ensure both devices are powered off if recommended by the equipment manufacturer before connecting or disconnecting the cable.

Recommendations

Use the cable in environments within the equipment manufacturer's recommended temperature and humidity ranges, avoid tight bends near the connectors, and inspect molded hoods and connector screws periodically for secure contact and reduced mechanical strain.