ACT 15 meter seriële 1:1-verbindingskabel 9-pins D-Sub stekker - 9-pins D-Sub bus

The ACT 15 metre Serial 1:1 connection cable provides a 9 pin D-sub male connector on one end and a 9 pin D-sub female connector on the other. With a total length of 15.00 m and an ivory colour, the cable is designed for serial data transmission between devices that use standard 9 pin D-sub ports. The molded hoods and 1:1 wiring support straightforward connections with consistent pin mapping.

Advantages

The cable features molded hoods for strain relief and protection of the connectors. Its 1:1 wiring preserves direct pin-to-pin correspondence, reducing the need for adapter wiring. At 15 metres length the cable allows flexible placement of connected equipment while maintaining a standard serial interface.

Suitable for

• Connecting PCs, routers or industrial equipment with 9 pin D-sub serial ports
• Extending serial connections in offices, workshops or labs
• Use in setups where a straightforward 1:1 pin mapping is required

Key specifications

• Length: 15.00 m
• Connector A: 9 pin D-sub male
• Connector B: 9 pin D-sub female
• Wiring: 1:1
• Colour: Ivory

How to use

Match the 9 pin D-sub male connector to the female serial port on one device and the 9 pin D-sub female connector to the male serial port on the other device. Ensure connectors are aligned correctly before seating and tighten any thumbscrews if present to secure the connection. Route the cable to avoid tight bends and sources of electromagnetic interference for stable data transmission.

Recommendations

For reliable performance, avoid running the cable in parallel with high-voltage power lines and minimize sharp bends. Inspect molded hoods and connectors periodically for wear; replace the cable if shielding or connector integrity is compromised.