ACT blauw 2 meter U/UTP CAT5E patchkabel componentniveau met RJ45-stekkers

Patch Cable ACT Blue 2m U/UTP CAT5E with RJ45 Connectors is a 2-meter unshielded twisted-pair (U/UTP) network cable designed for standard Ethernet connections. The cable uses AWG#24 conductors, PVC sheath and blue (RAL 5012) colouring, and is fitted with RJ-45 connectors with 50 µin gold-plated contacts to ensure reliable signal transfer and corrosion resistance. It supports data transmission suitable for typical CAT5E applications, including networks up to 1 Gbps.

Advantages

The ACT CAT5E patch cable provides a balance of flexibility and durability with a PVC jacket and AWG#24 conductors. Gold-plated 50 µin contacts on the RJ-45 connectors improve contact reliability and reduce oxidation. The 2 m length and blue RAL 5012 colouring make cable management and identification easier in structured cabling environments.

Suitable for

• Connecting computers, switches and routers in home or office networks
• Patch panel to network device connections in server racks
• Temporary or permanent Ethernet extensions where CAT5E performance is sufficient

Key specifications

• Cable type: U/UTP (unshielded twisted pair), CAT5E component level
• Length: 2 m
• Conductors: AWG#24
• Connectors: RJ-45 to RJ-45
• Contacts: 50 µin gold plating
• Sheath: PVC
• Colour: Blue (RAL 5012)

How to use

Plug each RJ-45 connector into the appropriate Ethernet port on your devices (for example, a computer and a switch or router). Ensure connectors are fully inserted until the latch clicks. Route the cable to avoid sharp bends and tight kinks; secure with cable ties or management clips if needed. For best performance, avoid running the cable parallel to power lines or sources of electrical interference.

Recommendations

Use this CAT5E patch cable for standard 10/100/1000 Mbps Ethernet links within the recommended 100 m maximum segment length for twisted-pair cabling; replace with higher-category cables (CAT6/6A) if higher bandwidth or future-proofing is required.