ACT geel 15 meter U/UTP CAT5E-patchkabel met RJ45-stekkers

The ACT IB5815 is a 15 meter U/UTP CAT5E patch cable with full copper AWG#24 conductors and PVC sheath. It features gold-plated RJ-45 contacts (50 µ) and supports a bandwidth of 100 MHz. The cable comes in RAL 1023 (yellow) and is 100% tested to ensure consistent data transmission for home and office networking.

Advantages

Full copper AWG#24 conductors provide stable signal transmission and lower attenuation compared to plated alternatives. Gold-plated 50 µ RJ-45 contacts improve corrosion resistance and connection reliability. The PVC sheath offers mechanical protection and flexibility for typical installation scenarios. The cable is 100% tested to verify performance and reduce the risk of faults.

Suitable for

• Ethernet connections up to CAT5E speeds in home networks
• Office network patching and workstation connections
• Connecting switches, routers, patch panels, and desktops
• Structured cabling runs where a 15 m length is required

Key specifications

• Type: U/UTP CAT5E patch cable
• Length: 15 m
• Conductors: Full copper AWG#24
• Bandwidth: 100 MHz
• Contacts: RJ-45, 50 µ gold-plated
• Sheath: PVC
• Colour: RAL 1023 (yellow)
• Testing: 100% tested
• Brand: ACT, MPN: IB5815, EAN: 8716065134926

How to use

Insert the RJ-45 connector into the corresponding socket on your switch, router or network device until it clicks. Route the cable to avoid sharp bends and mechanical strain; maintain bend radius recommended for twisted-pair cables. For structured cabling, label both ends as needed and secure the cable with appropriate clips or cable ties, ensuring not to compress the connector or cable jacket.

Recommendations

For best performance, avoid running the cable parallel to high-voltage power lines and keep distance from large electromagnetic sources. Use the 15 m length for links within the same room or between adjacent rooms; if longer runs are needed, choose a suitable longer-rated cable or use network switches to extend the network.