ACT groen 5 meter LSZH U/UTP CAT6-patchkabel met RJ45-stekkers

ACT Green 5 meter LSZH U/UTP CAT6 patch cable with RJ-45 connectors on both ends provides reliable high-speed data transmission for network installations. The cable uses U/UTP CAT6 construction with AWG#24 conductors and 50µ gold-plated contacts, and its LSZH (Low Smoke Zero Halogen) sheath reduces smoke and toxic emissions in the event of fire. The cable is green (Pantone 342C) and sized for common patching and horizontal cabling needs.

Advantages

The cable combines CAT6 performance with LSZH safety properties, offering reduced smoke and halogen-free materials for environments where fire safety is important. Gold-plated 50µ contacts on RJ-45 connectors improve contact reliability and signal transmission. AWG#24 conductors and U/UTP twisted pair design support gigabit networking and stable signal integrity. The 5 m length provides flexibility for patch panels, switches and workstations while the green color helps with visual cable identification.

Suitable for

• Patch panels and switch-to-workstation connections
• Office and data centre horizontal cabling
• Environments requiring low-smoke, halogen-free cabling
• Gigabit Ethernet and standard CAT6 network applications

Key specifications

• Cable type: U/UTP CAT6
• Length: 5 m
• Conductors: AWG#24
• Connectors: RJ-45 — both ends
• Contacts: 50 µ gold-plated
• Sheath: LSZH (Low Smoke Zero Halogen)
• Colour: Green (Pantone 342C)

How to use

Connect one RJ-45 connector to the network switch, router or patch panel and the other connector to the target device such as a computer, IP phone or access point. Ensure connectors are fully seated until the latch clicks. Route the cable to avoid sharp bends and excessive tension; maintain recommended bend radius for CAT6 cables. For permanent installations, secure the cable with appropriate cable management to prevent strain on the connectors.

Recommendations

For best performance, keep cable runs within standard CAT6 length limits and avoid running parallel to high-voltage power lines. Use the green colour to mark specific circuits or zones in your network for easier identification during maintenance.