ACT stroomkabel netaansluitkabel CEE 7/7 stekker (haaks) - C5 (haaks) zwart 3 m

ACT power cord with an angled CEE 7/7 male plug and an angled IEC 60320 C5 female connector. The cable is 3 m long, black, and available in conductor cross-sections suitable for devices requiring 230 V AC at 6 A (3×0.75 mm²) or 10 A (3×1.00 mm²), providing a flexible connection for equipment with C5 inlets.

Advantages

The angled CEE 7/7 plug and angled C5 connector reduce stress in confined spaces and allow neat cable routing behind furniture or equipment. Two conductor sizes cover common current requirements (6 A and 10 A), and a 3 m length offers reach without excessive slack. The black jacket is unobtrusive and compatible with standard office and home setups.

Suitable for

• Notebooks and portable computers with an IEC C5 inlet
• Projectors and small power adapters that use a C5 connector
• Installations where an angled plug or connector is needed for space-saving

Key specifications

• Connector 1: IEC 60320 C5 female, angled
• Connector 2: CEE 7/7 male, angled
• Cable length: 3 m
• Conductor options: 3×0.75 mm² (230 V AC / 6 A) or 3×1.00 mm² (230 V AC / 10 A)
• Colour: Black
• Brand: ACT, MPN: AK5006, EAN: 8716065283044

How to use

Check the device rating to select the appropriate conductor size (6 A or 10 A). Insert the angled C5 connector into the device inlet until it seats firmly. Plug the angled CEE 7/7 into a compatible mains socket. Route the cable to avoid sharp bends and pinching; use the angled ends to position the cable along walls or behind furniture.

Recommendations

Do not exceed the rated current for the chosen conductor size and inspect the cable regularly for damage. Use the 3×1.00 mm² version for devices drawing up to 10 A and the 3×0.75 mm² version for lower-current equipment. Disconnect the cable by pulling the plug, not the cable, and avoid running the cord under carpets or through doors.